Rear wheel
-
15 and 17 parts dust seal in english
-
@jonne123 probably means the component i'm touching with the screwdriver
-
Yeah dunno, have they put in sealed bearings?
Either way they use just normal seals IIRC.
-
Yea those mine are loose are those presswd or something?
-
@jonne123 i usually just push them in there by hand
-
@autovictor never seen those on a dt before
-
-
They look like 2005-2005 RS 125 Rims.
They do not fit without modification.
Different brakes, different swingarm different forks. All needs modifying.
-
Different forks? Swingarm? What can you recommend and most cheaply?
-
@jonne123 Yeah you know, the Aprilia has completely different geometry to the DTR. So it's going to need fabrication.
The front and rear wheel need to be aligned. The front and rear sprockets need to align. The wheels need to be centralised. Cause it's from a completely different machine.
-
maybe spacers like the has my uncles friend is machinist
-
If money is a concern, stick with what you got and put some decent tyres on it.
Even Excel rims are expensive and require work. So there is no one easy solution.
The easiest way to do it would be to buy some nice and expensive Excel rims, and lace up your hubs to them That way you retain the original brakes and spacers and geometry with SM Rims.
The DTX solution, you need forks, brakes and wheels. These were hard to come by new, now it's practically a nightmare.
-
@jonne123 If you don't mind fabricating parts, then you'll need spacers and the hub carriers modified to take the bigger brakes. and a bracket made to mount the brakes to the wheels.
Can see the work required in my DTRE build thread as I run RS125 wheels on my DTR.
-
I know i need brake caliper upradge nad change just brake leg on right. on rear put the wheel backwars
-
can you link the thread
-
No, you need to centralise the wheels, rotate the tyres and also line up the front and rear sprockets. Otherwise you'll chew through rear sprocket carrier bearings in no time at all!
-
-
but the axle radious is the same? can i keep front brake caliper at left side?
-
does stock rs hub carries fit?
15/47