Dork bottom Allen bolts
-
Has anyone had any luck shifting these after they have stuck themselves solid into the alloy fork bottoms?
Heat, WD40 and so on?
Any info good or bad would be appreciated
-
Sometimes you can compress the leg against the spring and this provides enough friction to allow you to undo it.
-
It wasn’t the damper rod it was stuck in. The head of the Allen bolt was ‘welded’ to the fork bottom alloy. I drilled it out in ecrements till it was 11mm then banged an Allen key in. The ball/swively end of the Allen key keyed into it nicely. What with the heat of the drill and shock it freed off enough to jam a brush handle down the Stanton to hold the damper rod in place and undo the Allen bolt.
One down, one to go!
-
It wasn’t the damper rod it was stuck in. The head of the Allen bolt was ‘welded’ to the fork bottom alloy. I drilled it out in ecrements till it was 11mm then banged an Allen key in. The ball/swively end of the Allen key keyed into it nicely. What with the heat of the drill and shock it freed off enough to jam a brush handle down the Stanton to hold the damper rod in place and undo the Allen bolt.
One down, one to go!@SpookDog on the next one I would try an impact driver. Not the electric drill type but the manual type that you give a sharp blow with a hammer to. They really are amazing tools for those seized solid bolts and I bought mine for £5.99 from one of those large discount stores like what! Or Wilko.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login