Gearbox failure
-
@lllDennis Best jetting for Athena 170 is 300 main jet on the
Mikuni tm28 but with the powerjet blocked off. Just cut the
rubber tube in half from the float chamber to the powerjet then block the 2 halves of the rubber tube with a couple of 5mm threaded bolts or similar. -
@llldennis dayum, that's not a stripped gear, that's completely melted
-
@calum Any recommendations on a crankshaft? While everything is open I want to replace it anyway (Has some small grooves where the bearing is). Best with original or aftermarket?
@llldennis Didn't know they do aftermarket cranks?
Always Originate, Never Pirate!
-
@llldennis Didn't know they do aftermarket cranks?
-
@llldennis Didn't know they do aftermarket cranks?
-
There's some on ebay for less than £200
@nottsbiker https://www.pjme.co.uk/acatalog/Yamaha-DT125R-Complete-Crankshaft-Top-Racing--4596.html#SID=103
DT200WR 1997 - New Project
DTR 125 1997 - The Bike That Got Stolen
DTR 125 2002 - Project
DT 125 LC 1986 - Old Bike -
@jimmydc98 Cheap
That's good to know at least. Connecting Rod for my RS is that price alone
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login