Coolant loss
-
Are the composite gaskets much thicker than the metal shim gaskets? I’m wondering about it affecting the squish band gap.
I got 200 miles out of the Chinese one I had kicking around. I have to try the copper one now, with Hylomar to fill the gaps. Just till I get some pennies in my pockets. Or unless the copper on is a keeper
-
Are the composite gaskets much thicker than the metal shim gaskets? I’m wondering about it affecting the squish band gap.
I got 200 miles out of the Chinese one I had kicking around. I have to try the copper one now, with Hylomar to fill the gaps. Just till I get some pennies in my pockets. Or unless the copper on is a keeper -
This is weird, I was seeing lots of gaskets made of composite for dtr’s (125) made by Athena. Now i can only find one and that looks like they used a 170 pic for the listing.
Do Athena make composite gaskets for a 125? Or is it just 170?... -
@everyone
What size torque wrench are people using to torque down the cylinder head while in the frame?
I only have a 1/2inch drive that is way to big to fit... -
@calum
Cheers bud...
2 nm’s is where my wrench kicks in. It’s too near the threshold for me to trust. If I want to do it right I really want new studs and dome nuts with washers.
I’ve never had troubles with single cylinder bikes before, then again none of them were liquid cooled... -
@calum
Cheers bud...
2 nm’s is where my wrench kicks in. It’s too near the threshold for me to trust. If I want to do it right I really want new studs and dome nuts with washers.
I’ve never had troubles with single cylinder bikes before, then again none of them were liquid cooled...Thoughts please!...
3 times now my head gasket has blown. The first time it was a good gasket with 3000 miles on it, the 2nd time it was a cheap Chinese job that was ‘used but not run’. 3rd time was using an unfamiliar copper gasket without the proper spray sealant, so the last 2 are on me.
Each time it failed in a different place, but! the weird thing is that it always failed on the upper, head side of the gasket. The bottom half was always sealed firmly to the barrel, with absolutely zero sign of leakage or blow by. Any ideas why?... -
Thoughts please!...
3 times now my head gasket has blown. The first time it was a good gasket with 3000 miles on it, the 2nd time it was a cheap Chinese job that was ‘used but not run’. 3rd time was using an unfamiliar copper gasket without the proper spray sealant, so the last 2 are on me.
Each time it failed in a different place, but! the weird thing is that it always failed on the upper, head side of the gasket. The bottom half was always sealed firmly to the barrel, with absolutely zero sign of leakage or blow by. Any ideas why?... -
Thoughts please!...
3 times now my head gasket has blown. The first time it was a good gasket with 3000 miles on it, the 2nd time it was a cheap Chinese job that was ‘used but not run’. 3rd time was using an unfamiliar copper gasket without the proper spray sealant, so the last 2 are on me.
Each time it failed in a different place, but! the weird thing is that it always failed on the upper, head side of the gasket. The bottom half was always sealed firmly to the barrel, with absolutely zero sign of leakage or blow by. Any ideas why?... -
@spookdog What!
What do you mean "Good gasket with 3000 miles on it"? Head gasket? They are not reusable.
The chinese ones simply don't work.
Just get a genuine or Athena gasket. Brand new, never fitted and use that.
@calum
It ran sweet for 3000 miles then blew. I didn’t reuse it. It was new & Athena. I just got another delivered today for under £13 which I thought was quite good...Yeah, the up is on the up
its weird that they all blown at the head side of the gaskets...
Is my squish supposed to be less than a mm, with gasket included?...
The head was done by PJME 3000 miles ago. I’m thinking of maybe lapping it on a good bit of plate glass -
@calum
It ran sweet for 3000 miles then blew. I didn’t reuse it. It was new & Athena. I just got another delivered today for under £13 which I thought was quite good...Yeah, the up is on the up
its weird that they all blown at the head side of the gaskets...
Is my squish supposed to be less than a mm, with gasket included?...
The head was done by PJME 3000 miles ago. I’m thinking of maybe lapping it on a good bit of plate glass -
@spookdog Was going to say!
Have you checked out...
https://dt125r.co.uk/topic/11/how-to-i-gentle-skim-your-head-barrelI’m gonna have to check it out. My brand new Athena gasket, correctly torqued down, blew again
️ Did about 100miles. Weird thing is that the bike ran the best ever after it let go. Crisp rev definition, no bogging down. I’m gonna have to compression test the engine next time. What range is good/normal!?
