DT125R Linkage Bearings/Bushings measurements

[DanielClox]

Hey guys,
I am trying to source the bearings/bushings and seals for the swingarm linkage on my DT125R from simplybearings so I can save some money
But I am having trouble finding the measurements (I don't have the ones I took out to measure)

The part numbers are:
14 - 93315-32052
15 - 9310920076
16 - 90387-164U7
20 - 90386-20120
21 - 9310920076

Does anyone know the measurements of these parts?
For the 14 bearings, I have seen mentioned here in this forum both 22x28x20mm and 20x27x15mm
The 16, I have seen it linked somewhere to a bushing with the measurements 16x22x66.5mm which would indicate the bearing has to have 22mm inner diameter, but, I have found a page saying the bearing is 20x27x15mm (http://www.pivotworks.com/ProductInfo.aspx?item_id=52432)

If anyone can shed light on this would be appreciated. Thanks in advance

[SpookDog]

@DanielClox

Have you tried contacting them and telling them what you want? As far as I know there aren’t any different variations, year to year or dtre, whatever.
I’m sure they’ll be able to sort you out...

[DanielClox]

@SpookDog Who do you mean by "them"? You mean contact simplybearings to see if they know the dimensions by part number?

[Calum]

@DanielClox I think @SpookDog Means Pivotworks.

They are listing the bearing under that part number after all.

I'd press the original one out and just measure it if it were me.

[SpookDog]

@DanielClox

Sorry, ignore me. For some reason I thought it was All Balls you were looking into. They do the whole linkage kit for about £50...
I really need to reassess my speed reading posts! 🤪

[DanielClox]

@SpookDog No problem
I don't think they do, the kit they sell only has the bearings and bushings for the swingarm, not the linkage

[SpookDog]

@DanielClox

Again, sorry! I must of been having a massive brain fart! You’re right, I thought I had a link saved but it’s for a Yz for some reason

The only linkage kit I can find now is £110 ️