Power valve sound
-
wrote on 20 Mar 2024, 17:49 last edited by
Hi guys, my power valve started sounding weird when i turn on the bike. At first it wall a little like nothing but now it sounds like i have small mice factory in there..... Should i be concerned?
-
Hi guys, my power valve started sounding weird when i turn on the bike. At first it wall a little like nothing but now it sounds like i have small mice factory in there..... Should i be concerned?
wrote on 20 Mar 2024, 21:26 last edited byMy power valve in the barrel actually started sticking/seizing because I was using inferior 2T oil. It made the servo work overtime!
I’d undo the centre screw and remove the cable rotor. Then check the servo to see if it sounds better without the load of the power valve on it. If it does try turning the valve by hand and seeing if it’s sticky or not…Whatever you do, I would definitely check it out…
-
My power valve in the barrel actually started sticking/seizing because I was using inferior 2T oil. It made the servo work overtime!
I’d undo the centre screw and remove the cable rotor. Then check the servo to see if it sounds better without the load of the power valve on it. If it does try turning the valve by hand and seeing if it’s sticky or not…Whatever you do, I would definitely check it out…
-
wrote on 21 Mar 2024, 21:33 last edited by
Taking the powervalve apart is pretty easy, you’d be surprised how gummed up it can get too. Always worth checking that out
