Where on the loom do brake light switches connect

[dan28]

Just been looking at my loom it's all labeled up

I ve just noticed there doesn't seem to be any thing that connects to the brake light switchs ?

[NINJA]

@dan28 From memory there should be 3 wires at the end of the loom. One yellow, one blue and one black.

[Calum]

That sounds abput right.

[dan28]

What other wires are they near on the loom as I don't seem to have them

[Calum]

@dan28 You also just use a banjo switch if it's been chopper mate. Really simple and nice way if doing it if you have to.

[dan28]

@Calum said in Where on the loom do brake light switches connect:

@dan28 You also just use a banjo switch if it's been chopper mate. Really simple and nice way if doing it if you have to.

I would rather use the original plugs in the loom as I am going to have to route the loom internally through the frame if I use a banjo it will make routing it more difficult

theres a square plug on the rear of my loom it has 3 wires , yellow ,black ,blue/red but its labelled as tail light

[dan28]