The Helios Project (Aprilia RS 125 Rotax 122 Biaggi Race Replica)
-
45+ no chance best I saw online is 45 bhp by some crazy guy with no sense and too much money he was from Italy I think I can't find any info on it anymore shame not that anyone would do the same unless they were rich and enjoyed rebuilding it daily
but people get 28 bhp all the time 35 has been reached by many
she looks a stunner in bits beautiful bikes swing arms are a piece of art thank god you didn't follow the crowd and polished it I found that Continentals Conti Attack 2 feel better on rs duo to the bike being so light the angle helps in corners and there great in the wet to maybe give them a go on your next set
looking forward to seeing progress
@terry-tz Hey cheers mate.
You know what, I have been looking at builds and have been told that I should have polished it. It's nice to hear you think otherwise.
I know keeping it clean is going to be a nightmare. But I really think it's a once or twice a year bike so it shouldn't be too hard to keep it mint.
Yeah, also note that different dynos give different readings. I think what really matters is how it performs out on the road, for a road bike that is.
Always Originate, Never Pirate!
-
@terry-tz Hey cheers mate.
You know what, I have been looking at builds and have been told that I should have polished it. It's nice to hear you think otherwise.
I know keeping it clean is going to be a nightmare. But I really think it's a once or twice a year bike so it shouldn't be too hard to keep it mint.
Yeah, also note that different dynos give different readings. I think what really matters is how it performs out on the road, for a road bike that is.
-
Chipping a little more off, but money is tighter than I was expecting.
Got some lovely bits in the post, but can't use them just yet.
Light weight Carbon Fibre sprocket cover. For an engine that is no where near built.
Light weight captive wheel spacers, some 100 grams lighter than the original, well every little helps.
As said, forgot to grab the photos of the wheels with rubber, helps the camera pick up the actual colour of the wheels.
I get it won't be to everyones taste, that's fine.
Rear linkage mated to the dog bones.
Counter sunk stainless steel hex head bolts for the seat lock. Won't be seen but at least I know it's fresh!
Battery box fitted to the brackets. Very snug fit with those new grommets.
All fitted to the frame using high quality titanium bolts.
The rolling chassis so far!
It's getting close to being able to wheel it into and out of the garage.
Always Originate, Never Pirate!
-
Chipping a little more off, but money is tighter than I was expecting.
Got some lovely bits in the post, but can't use them just yet.
Light weight Carbon Fibre sprocket cover. For an engine that is no where near built.
Light weight captive wheel spacers, some 100 grams lighter than the original, well every little helps.
As said, forgot to grab the photos of the wheels with rubber, helps the camera pick up the actual colour of the wheels.
I get it won't be to everyones taste, that's fine.
Rear linkage mated to the dog bones.
Counter sunk stainless steel hex head bolts for the seat lock. Won't be seen but at least I know it's fresh!
Battery box fitted to the brackets. Very snug fit with those new grommets.
All fitted to the frame using high quality titanium bolts.
The rolling chassis so far!
It's getting close to being able to wheel it into and out of the garage.
-
That's better! Those wheels look tremendous, a man after my own heart! Also replace bolts and fixings with quality even when they will never been seen, will be one of a kind completed.
@oldman Unfortunately, one of a kind, it will not be.
As said, these bikes are used for the Junior Moto GP racing, or were used rather (replaced with four strokes today).
So these bikes tend to get built to an exceptionally high standard. I don't have those sorts of deep pockets, but I will do my best where I can. It'll be SuperTeen Inspired for sure
I just need the right sized circlip for the front wheel then I can put the forks and swingarm on.
Hopefully next weekend.
-
A few little bits arrived for me today.
I got this exact disc on my DT. It was absolutely lovely, and was £60 cheaper than what I paid for it, so I jumped at the opportunity.
All fitted to the wheel using Titanium bolts.
Genuine handle bars and switch gear arrived. Plus Titanium wheel nuts and aluminium fork top.
Thinking of getting the handle bars painted, to contrast the white triple clamps. Then I can look to assemble it. Got some titanium handlebar bolts with these as well.
I've also redone the swingarm bolts with titanium, which was expensive. But it feels nice to chuck the money into this vehicle as it'll be a real nice sunny ride.
Although, I totalled the cost of the remaining parts, the price is eye watering. I think you could have bought two of these bikes brand new from Aprilia for the cost that this one is looking at. But of course, this will be far superior spec.
-
Works fine for me.
You have to give it a while. It uploads it to my server, which uploads it to imgur and then embeds the link. So just because it says 100 percent that just means you have uploaded it to my server
-
@calum where do you buy all of your titanium screws? Ebay presumably, but from whom?
@irongamer727 Company called raceti
-
TYGA Rear Sets arrived...not cheap and didn't come with titanium bolts. So bolts ordered will let you see it on the bike when the decent bolts come.
-
@calum those titanium bolts was NOT cheap!
@irongamer727 said in The Helios Project (Aprilia RS 125 Rotax 122):
@calum those titanium bolts was NOT cheap!
at around £5 per bolt, i think you can safely assume theyre not all titanium, some of the bolts are even pictured saying ''a2-70'' on them which means a2 stainless steel.
-
@irongamer727 said in The Helios Project (Aprilia RS 125 Rotax 122):
@calum those titanium bolts was NOT cheap!
at around £5 per bolt, i think you can safely assume theyre not all titanium, some of the bolts are even pictured saying ''a2-70'' on them which means a2 stainless steel.
@tunertom doubt Calum buys cheap shit. Gotta be a couple of hundred £ on bolts on that rs
-
@irongamer727 said in The Helios Project (Aprilia RS 125 Rotax 122):
@calum those titanium bolts was NOT cheap!
at around £5 per bolt, i think you can safely assume theyre not all titanium, some of the bolts are even pictured saying ''a2-70'' on them which means a2 stainless steel.
@tunertom Read the post bud, said these rear sets did not come with Titanium bolts hence why I haven't fitted them. Bolts order was 20 quid for four bolts. Just the mounting bolts, no sense in doing M6 10mm and two of the bolts were longer than the supplier has. Maybe in the fullness in time I will find someone that can replace them..
Hopefully get them next week.
-
Rear Sets Fitted
Yes I'm very pleased with the results. They're looking spanking. Note for the moment it's just the bolts that mount it to the bike that I've bought titanium. Not actually sure what that middle one connects to. It'll probably get removed.
Handlebars back from the coaters. Yes I'm feeling this colour scheme!
I've had to order some more titanium bolts. I may as well get the shock linkage bolts in titanium whilst I'm at it.
Few more weeks and then this baby will be on wheels.
I think the majority of the painting is done now. There is still a lot of money that needs to be spent on it. But the chassis is taking form quite nicely.
