DTX 125 PRODJECT
-
@stinkwheeler cylinders nice and all but those purple knives are cleannnnnn!
-
So i got my fat bars on thanks callum for the recommendation they seem to be spot on although now i need to take it all apart and powdercoat the yokes black im thinking... seat cover ordered new grips and a bar pad ... and i shall continue with getting the engine polished.... http://imgur.com/gallery/xffqfJ6
-
Just a small update polished the sprocket casing and sent he little guard off for chroming http://imgur.com/gallery/PDycNVf but still waiting on the barrel being bored out ... and parts from america and some handguards from china
... i hate waiting 
The hills are alive with the sound of ... braaaap baaaaap 😁
-
Just a small update polished the sprocket casing and sent he little guard off for chroming http://imgur.com/gallery/PDycNVf but still waiting on the barrel being bored out ... and parts from america and some handguards from china
... i hate waiting @stinkwheeler Yeah that looks balla!
-
Just a small update polished the sprocket casing and sent he little guard off for chroming http://imgur.com/gallery/PDycNVf but still waiting on the barrel being bored out ... and parts from america and some handguards from china
... i hate waiting @stinkwheeler Extra shiny - looks mint bud!!! :thumbs_up_light_skin_tone:
-
So still at it zeel is in the post now so rather chuffed just managed to acquire this dt200 3xp swingarm so polishing this at the momenthttp ://imgur.com/gallery/VPLpIo2 and the clutch cover still .... so time consuming but hopefully progress pictures verry soon
The hills are alive with the sound of ... braaaap baaaaap 😁
-
So still at it zeel is in the post now so rather chuffed just managed to acquire this dt200 3xp swingarm so polishing this at the momenthttp ://imgur.com/gallery/VPLpIo2 and the clutch cover still .... so time consuming but hopefully progress pictures verry soon
-
This polishing malarkey is hard work once my p1000 grit turns up i can do a final sand and polish and i can take photos fitted http://imgur.com/gallery/ovJ15pE
-
To get a good result and mirror finish it does take a lot of time and effort, but the finished result is well worth it. You can make life easier by removing as many scratches as possible with wet n' dry, I went down in grades all the way to 1200 grade. Plus using a polishing kit really helps and takes out a lot of the graft, once you have it looking pretty good then finish off with a final hand polish, using clean soft cotton cloths until you get that mirror finish;
And I've yet to try it, but this stuff is supposed to be the mutts nutts too;
-
Yea that looks pucker mate i dont think i will end up getting it that good it was a mess to begin with and takes alot of patience
-
Also made a little stainless bracket for the temp guage i plan on making one for the otherside with rev guage and shift light off the zeeltronic http://imgur.com/gallery/z7O6FsO
-
So after a long 2 month wait the zeeltronic is finally here http://imgur.com/gallery/SB8wNg1 along with a wiseco forged piston i can now start to get the ball rolling
The hills are alive with the sound of ... braaaap baaaaap 😁
-
So after a long 2 month wait the zeeltronic is finally here http://imgur.com/gallery/SB8wNg1 along with a wiseco forged piston i can now start to get the ball rolling
@stinkwheeler That's Zeely nice!!! :grinning_face_with_smiling_eyes: :smiling_face_with_open_mouth_closed_eyes: :smiling_face_with_open_mouth_cold_sweat: :face_with_tears_of_joy:
