-
@shellatit Dependant on what you're looking for there are many gear levers for other bikes which will fit the DT. There are also many aftermarket levers as well as OEM levers which are of a similar shape to the DT's. I would suggest that you search on ebay or motocross/enduro websites and look for a lever of a similar shape. Or search for dirt/pit-bike levers as they seem to be 10_a_penny. So long as the shape, length and spline sizing are correct, then it will fit with no issues and there are many to choose from.
For example I couldn't find a decent one for my Aprilia MX 125 and searched as described above and eventually I found this bad boy, which fits perfectly and looks the mutts_nutts too!!! :grinning_face_with_smiling_eyes: :grinning_face_with_smiling_eyes: :grinning_face_with_smiling_eyes:
A nice quality kick start lever such as these, would match that gear lever and look awesome too;
SEDUCED BY THE DARK SIDE!!!
-
I re build alot of WR 125 r and x KTM EXC KTM EGS husky and DTRs and i have found on my WRS and DTRs any thing with a 10 ml or 12ml gear shaft spine depending how much the teeth have worn will fit most DT 125 R and RE ,When there from Yamah just make sure the curv is out far enough not to catch the case
-
@Bentley now then mate can ya send me a link for where ya got that leaver mate where i get mine are out of stock..i have a group on facebook if you would like to take a look ..https://www.facebook.com/groups/3063750823943880/
-
.....Yz is totally different kick start to DTR gear shift is the same
