Dt200 engine build
-
Hey there all. I've been wanting to fit a Dt200 engine into my for a few years now and so when I saw a reasonable priced seized 200 bottom end on eBay I couldn't resist. I however couldn't find a reasonable priced Wr200 barrel with powervalve nor a Dt200 barrel. Eventually I spotted a Sdr200 cylinder on the bay complete with power valve (sadly it doesn't have boost ports like the we
) and purchased it. Needless to say the crank will be sent for a rebuild. My question is does anyone know if the taper on the flywheel side of the Dt200 crank is the same as the Dt125? Im having trouble finding a 200 stator, flywheel and cdi. I'm hoping at first to be able to run it with the 125 stator and cdi. I know it won't be running at optimum but can anyone confirm if this won't work or will be harmful to the engine or have any ideas. Thanks, Sam -
3ET/2YY DT200R stator and flywheel are exactly the same as in DT125R. Only difference is part number stamped on the flywheel.
-
3ET/2YY DT200R stator and flywheel are exactly the same as in DT125R. Only difference is part number stamped on the flywheel.
@Challenger excellent news
thanks for the reply -
is it possible to fit the re/x stator on the dt/wr 200 crankshaft? does anybody did the 200 conversion on a re/x?
-
is it possible to fit the re/x stator on the dt/wr 200 crankshaft? does anybody did the 200 conversion on a re/x?
@autovictor The RE/X Flywheel goes on reverse to that of the DTR and has the starter motor teeth.
So at a guess, I'd say it's not possible without modifications. Woodruff key will be in the wrong place and taper of the crank will be wrong.
-
@oldman nice to see that cylinder on the forum
-
guys how much cost 3xp barrel at the moment? saw one on ebay from greece for 215€ ( need to be repaired i guess)
-
guys how much cost 3xp barrel at the moment? saw one on ebay from greece for 215€ ( need to be repaired i guess)
@pedrobatista10 there are really a lot of variables when it comes to the condition of a barrel
-
@Challenger this one, i think its the only one for sale on ebay.
-
look at this beautiful kit, not cheap but looks very good
https://www.olx.pt/anuncio/kit-cilindro-200-para-yamaha-dt-125-r-dtr-tzr-rz-IDEht5T.html
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login