nsr125 help
-
does the pic need to be on photobucket or something can I not get them out of my pics on the laptop ?
@mad73 Correct. You need to upload them to Photobucket.
This forum can host its own photos. I could enable the forum so that we could upload photos to it.
Draw back is that this forum is being hosted from my house, on one of these!
http://cdn1.alphr.com/sites/alphr/files/6/14/raspberry_pi_b_2_0_0.jpg
And I only have a 32Gb SD card for it.
SD cards are notourious for failing. I back the forum up to my HDD every week. But when it fails, we are going to lose a weeks worth of posts
Sorry but the forum isn't busy enough to warrant paying hosting company.
-
-
not sure wot happened with the pic but the link works
do have side fairings wont put them on till I no he aint gona drop it@mad73 said:
not sure wot happened with the pic but the link works
do have side fairings wont put them on till I no he aint gona drop itPlease read:
http://192.168.0.2/topic/5/embedding-images
If you're still having problems open up another thread.
-
ok son went out on the nsr the other night and said its not running right so I took it for a spin and its hard to pull away on it its bogging down quite a bit quite dangerous pulling out of junctions but once moving all seems good, also fork sill is leaking which aint much of a prob I changed them a couple of months ago must not of put it in right as the other side is good
any one got any ideas wot to look for with the bogging jets are correct -
Sounds like way too much air. Tell me does it sound quite deep when you rev it.
In neutral after its warm, when you blip the throttle does it respond instantly.
Like this numpty here
Says aww 99 octane fuel killed my bike. Uhmm no mate, you can clearly here the snorkel is not in the air box. Clear as day. I don't understand why people remove them lol
-
I had a 'full power' NSR foxeye j22 j think it was. Although I never had any problems like yours, the powervalve would stop working all the time and would retard the engine. Sounds similar to what you're experiencing, I just ended up pinning the valve wide open and it never gave me an issue again.
I'm not saying this is your solution, but it would be something I would take a look at regarding the running issues. With regards to PSI and compression, definitely check everything is bolted down to correct torque settings. Double check everything, make sure the carb is installed tight, no air leaks, proper float movement and clear jets. I know it's all simple stuff but sometimes stuff gets overlooked and it's the simplest thing that's stopping the bike from working.
@Carlosrexx said:
I had a 'full power' NSR foxeye j22 j think it was. Although I never had any problems like yours, the powervalve would stop working all the time and would retard the engine. Sounds similar to what you're experiencing, I just ended up pinning the valve wide open and it never gave me an issue again.
I'm not saying this is your solution, but it would be something I would take a look at regarding the running issues. With regards to PSI and compression, definitely check everything is bolted down to correct torque settings. Double check everything, make sure the carb is installed tight, no air leaks, proper float movement and clear jets. I know it's all simple stuff but sometimes stuff gets overlooked and it's the simplest thing that's stopping the bike from working.
how would I pin open the power valve ? might try this
-
@Carlosrexx said:
I had a 'full power' NSR foxeye j22 j think it was. Although I never had any problems like yours, the powervalve would stop working all the time and would retard the engine. Sounds similar to what you're experiencing, I just ended up pinning the valve wide open and it never gave me an issue again.
I'm not saying this is your solution, but it would be something I would take a look at regarding the running issues. With regards to PSI and compression, definitely check everything is bolted down to correct torque settings. Double check everything, make sure the carb is installed tight, no air leaks, proper float movement and clear jets. I know it's all simple stuff but sometimes stuff gets overlooked and it's the simplest thing that's stopping the bike from working.
how would I pin open the power valve ? might try this
-
Sounds like way too much air. Tell me does it sound quite deep when you rev it.
In neutral after its warm, when you blip the throttle does it respond instantly.
Like this numpty here
Says aww 99 octane fuel killed my bike. Uhmm no mate, you can clearly here the snorkel is not in the air box. Clear as day. I don't understand why people remove them lol
