Recommended screwdriver for clutch cover?

[ricky0115]

These screws are awful, what size should i use? ph2 worked on 3 but the rest are way too tight I dont want to round any off!

[finnerz89]

You need an impact driver really, then change them for stainless cap head screws. If they chew up completely you could cut a slot in the head then use a big slotted screwdriver.
Or maybe try tapping them round with a centre punch?

[declan]

@finnerz89 that has saved my ass so many times never done a clutch though but yeah impact is ideal

[ricky0115]

Ended up tapping a screwdriver whilst twisting & replaced them with hex heads! Cheers guys

[Calum]

Definitely replace some stainless bolts lol.

Just be careful how tight you do them, the bolts will be stronger than the engine cases, and you can risk stripping a thread.

[ricky0115]

@calum yeah I was very careful not to over tighten them, who puts screws on an engine casing anyway lol

[Calum]

@ricky0115 Yamaha?

[ricky0115]

@calum should I of replaced the gasket? The old one was still in tact so I reused it oops

[declan]

@ricky0115 nah you will be good

[ricky0115]

@declan Phew, thanks