The Helios Project (Aprilia RS 125 Rotax 122 Biaggi Race Replica)
-
I guess you purchased the cylinderkit on PJME. I mean that was a pretty good price for it!
I know you have bought the special cylinderhead and got it ported but still, I thought the cylinder would be like £600 or something.
The polini big bore was a bit more. I guess you reckon you can get more power from your kit, but how?
-
@irongamer727 So I didn't get this barrel ported. I just said that the porting work is damn good, albeit some minro flaws.
The last RS in my garage used the Polini big bore, before the 140 kit was released.
https://www.youtube.com/watch?v=GobIl4e-mU8&t=2s&list=PL66C1264C7D6205BB&index=3
Very quick bike, but the Polini eventually seized after very little miles and most of it was being ridden softly.
It was my brothers bike, but mi casa, su casa as the Spanish say.
Big bores are hard on engines. It's not the first time I've said it, and it won't be the last, in my experience the Athena was pretty poor for performance. Reliable mind you.
-
@calum so the polini isn't very reliable then?
I've heared the same. I'm happy with the Athena though. Strong, not very fast but comfortable. -
@irongamer727 Good torque gains from the Athena, if that what you're after. And, unlike the Polini, doesn't affect reliability.
I can only comment on my own experiences, and that may have been down to incorrect jetting. As this wasn't my bike I wasn't at liberty to jet it as I saw fit.
The reason I went with the 140 kit, is that I am not interested in more CC's, I want it to rev to the moon and the fact that the person who designed this designed the original. It was also (as you say) cheap. Just £40 more than having my old barrel replated and ported with a new piston. Something different as well, I've not experienced this cylinder before.
I'm excited
Still £2k of bits left to buy for this bike yet. -
@calum it's going to be interesting to hear how she runs!
-
@irongamer727 Yeah sure, I expect it to be...disappointing lol. If I bought a rag around RS and bolted on a cylinder kit then yeah, fair enough. But having been building it for nearly 3 years, the expectations are too grand.
-
Another delivery of goodies arrived!
I think this is shamefully about all I can afford this month
Brand new set of mirrors
Now, I skimped out here. Samco hoses are around £100, but I got these from China for like £35
To be honest with you, they're banging for the money. Maybe I'll get the samco ones further down the line, although I doubt it.
-
-
-
-
-
@declan Direct from China, like alibaba style.
Engine built, I will clean the carb tomorrow to make it spanking.
Titanium bolts mount the intake to the engine. Along with my powdercoated skull cap, which should contrast nicely with my NGK racing coil and HT Lead, along with the red engine mount.
Just awaiting on some carbon from America, my on going Hydraulic clutch conversion, then this engine is ready to rock and roll.
And for those interested in the hydraulic clutch conversion, it would appear, after much discussions with far more qualified engineers, that the solution the other chap derrived is not adequate.
I will explain in a separate thread, but basically it's gone from being very easy, to needing a bit more thought...but more on that when it's finished.
-
-
-
@calum COOL I bought a job lot of parts for my MX and there was a 34mm Dellorto in there. It's a VHSB model but needs a good clean and a new top cap, as the plastic one's damaged. Those alloy caps are cool looking but cost £55 new. I think it's the flat sided version, but will need to dig it out and check.
-
-
Cant wait to hear it sing :smiling_face:
