Romeu exhaust mod
-
wrote on 3 Nov 2018, 21:45 last edited by
-
wrote on 3 Nov 2018, 21:50 last edited by
-
wrote on 3 Nov 2018, 21:55 last edited by
Had the same problem with my RE, found a spacer about 1-2inch long behind the silencer bracket brought it out enough not to melt number plate and gave the bike a better look filling out the fairing
-
wrote on 3 Nov 2018, 22:02 last edited by oldman 11 Mar 2018, 22:02
-
wrote on 5 Nov 2018, 12:03 last edited by jgr72 11 May 2018, 12:05
-
wrote on 5 Nov 2018, 12:34 last edited by
Had a ride around on it yesterday to check oil seal, back end plastered with oil spots as standard, needs deflecting to prevent fouling, oil on end drips on to brake caliper as well, they have only been running in so no high revs
-
Had a ride around on it yesterday to check oil seal, back end plastered with oil spots as standard, needs deflecting to prevent fouling, oil on end drips on to brake caliper as well, they have only been running in so no high revs
-
Had a ride around on it yesterday to check oil seal, back end plastered with oil spots as standard, needs deflecting to prevent fouling, oil on end drips on to brake caliper as well, they have only been running in so no high revs
-
wrote on 5 Nov 2018, 18:02 last edited by NINJA 11 May 2018, 18:02
-
wrote on 5 Nov 2018, 21:31 last edited by
Gearbox oil fine, had faulty pump seal allowing 2stroke oil to fill gear oil, that's fine now and had all new crank seals. Exhaust off for welding now but will check pump stroke when it's back. Has been running below 6k for over 400 miles (until I took it out) so expected a little excess lubrication. Oil pump was rebuilt to original spec by third party so should be set to spec, but check of stroke will know for sure. Would have gone further on ride but an incident on the pw50 bruised my coxic bone, went up a bump and didn't allow for fact suspension fully compressed at time of impact. I guess Pw's aren't set up for 14 stone seniors that should know better
-
wrote on 5 Nov 2018, 21:42 last edited by
-
wrote on 9 Nov 2018, 22:13 last edited by
-
wrote on 9 Nov 2018, 22:36 last edited by
That looks super!
-
wrote on 9 Nov 2018, 22:56 last edited by
Pleased with it, mates son welded for me, looks original and owner happy, that's a result!
-
wrote on 10 Nov 2018, 13:39 last edited by
I usually dislike those end tips, but this does look smart!
-
wrote on 11 Nov 2018, 19:40 last edited by
-
Bored this evening so decided to go the full hog and mirror polish silencer, looks better in real life if you know what I mean.
wrote on 12 Nov 2018, 06:49 last edited by@oldman said in Romeu exhaust mod:
Bored this evening so decided to go the full hog and mirror polish silencer, looks better in real life if you know what I mean.
Does look good, silly unrelated question, what's the black handle looking thing inside the white rear frame grab handle?
Cheers
-
@oldman said in Romeu exhaust mod:
Bored this evening so decided to go the full hog and mirror polish silencer, looks better in real life if you know what I mean.
Does look good, silly unrelated question, what's the black handle looking thing inside the white rear frame grab handle?
Cheers
wrote on 12 Nov 2018, 06:57 last edited by@Bluestoesonnose Luggage rack.
-
wrote on 12 Nov 2018, 07:45 last edited by
The one thing I can't find
-
wrote on 12 Nov 2018, 08:46 last edited by
try eBay France and other European sites, should find one there