DT200WR restoration project pic heavy
-
@Louis-James Nice job and boy that kickstand looks MAAAAAAAAAAAHHHHHHHHHHOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOSSSSSSSSSSIIIIIIIIIIIIIIIVVVVVVVVVVVVVEEEEEEEEEEEEEEEEE!!!!!!! :grinning_face_with_smiling_eyes: :smiling_face_with_open_mouth_closed_eyes: :grinning_face_with_smiling_eyes:
wrote on 29 Nov 2018, 17:50 last edited by@NINJA I know, strange hahaha but better than DT stand I think
-
@NINJA I know, strange hahaha but better than DT stand I think
wrote on 2 Dec 2018, 19:23 last edited by@Louis-James anyone know much about fitting a battery? I just want to do a lights and PV test.. I think you can connect it to the loom r/s of flywheel
-
@Louis-James anyone know much about fitting a battery? I just want to do a lights and PV test.. I think you can connect it to the loom r/s of flywheel
wrote on 3 Dec 2018, 14:10 last edited by@Louis-James does it have the three white wires coming from the stator? You'd need them and a voltage regulator to convert the output from ac to dc.
-
@Louis-James does it have the three white wires coming from the stator? You'd need them and a voltage regulator to convert the output from ac to dc.
wrote on 3 Dec 2018, 18:02 last edited by@DTR-NSR I'll have another look but it has a voltage regulator already
-
@DTR-NSR I'll have another look but it has a voltage regulator already
wrote on 3 Dec 2018, 18:28 last edited bySo hopefully the main part of the project will be done this week.
Got the oil tank all set up nicely.
I had to extend one of the coolant hoses as was way too short.
This fairing bracket I ordered was no longer available so made one myself.
As you can see the fuel tank is in amazing condition for age.. didn't even powdercoat it..
All the colours are colliding and making a nice 90s mess haha just as I wanted.
The fairings are ready to collect from the body shop
-
So hopefully the main part of the project will be done this week.
Got the oil tank all set up nicely.
I had to extend one of the coolant hoses as was way too short.
This fairing bracket I ordered was no longer available so made one myself.As you can see the fuel tank is in amazing condition for age.. didn't even powdercoat it..
All the colours are colliding and making a nice 90s mess haha just as I wanted.
The fairings are ready to collect from the body shop
wrote on 3 Dec 2018, 19:37 last edited by@Louis-James if its got the voltage reg already I should think it will. Probably have 3 white wires going to the vr and one red. The red is the 12v positive output that would go to the battery.
-
wrote on 4 Dec 2018, 16:41 last edited by
We'll here we are.... Fairings and graphics.
-
wrote on 4 Dec 2018, 16:42 last edited by
-
wrote on 4 Dec 2018, 17:24 last edited by
Yes mate, that's look the tits!
-
wrote on 4 Dec 2018, 18:00 last edited by
@Calum cheers Cal. Did you notice the paint has fibre pattern? Just waiting for the indicators before I can put headlight and rear fender on.. then sort the brakes and chain
-
We'll here we are.... Fairings and graphics.
wrote on 4 Dec 2018, 18:55 last edited by@Louis-James She looks lovely dude, where did you get the heat shield stuff from???
-
wrote on 4 Dec 2018, 19:21 last edited by
@NINJA thanks:) you can get it in eBay, I got 6 fairly large sheets for £12
-
wrote on 4 Dec 2018, 19:52 last edited by
Yeah that's looking mega mate!
-
@NINJA thanks:) you can get it in eBay, I got 6 fairly large sheets for £12
wrote on 4 Dec 2018, 20:01 last edited by@Louis-James Do you have a link please bud???
-
wrote on 4 Dec 2018, 20:07 last edited by
@NINJA can't fit the exact listing but this is similar
https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F130796418818 -
@NINJA can't fit the exact listing but this is similar
https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F130796418818wrote on 4 Dec 2018, 20:11 last edited by NINJA 12 Apr 2018, 20:13@Louis-James OK Thanks, I ordered some from that dude before for my DTR, but the sheets were a bit on the small side. Good quality heat shield tho - nice and thick, I'll need some for my MX 125.
-
wrote on 5 Dec 2018, 15:34 last edited by
Well this was annoying.. normally wemoto is good but they sent the wrong brake lines... Says on the box dt200wr 3xp.
Will not fit. Even if routed differently.
Thinking about 1990-96 yz250 lines now
Got the calipers sand blasted and painted up.
Finally the clutch cable came
Only a few bits holding me up.
New chain rollers came.
-
wrote on 10 Dec 2018, 23:02 last edited by
New horn
New yz250 rear brake line
New yz250 neon pink disc guard (matched shock spring)
And the FMF fatty. Can't believe how much thicker the metal is to the DEP.Just the final bits and pieces need doing. Still waiting for the indicators and custom front brake hose.
-
New horn
New yz250 rear brake line
New yz250 neon pink disc guard (matched shock spring)
And the FMF fatty. Can't believe how much thicker the metal is to the DEP.Just the final bits and pieces need doing. Still waiting for the indicators and custom front brake hose.
wrote on 10 Dec 2018, 23:28 last edited by@Louis-James Wow, that is looking superb!
-
New horn
New yz250 rear brake line
New yz250 neon pink disc guard (matched shock spring)
And the FMF fatty. Can't believe how much thicker the metal is to the DEP.Just the final bits and pieces need doing. Still waiting for the indicators and custom front brake hose.
wrote on 10 Dec 2018, 23:43 last edited by@Louis-James Looks mint bud - top job!!! :thumbs_up_light_skin_tone: :thumbs_up_dark_skin_tone: :thumbs_up_light_skin_tone: