DT200WR restoration project pic heavy
-
@Louis-James Nice job and boy that kickstand looks MAAAAAAAAAAAHHHHHHHHHHOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOSSSSSSSSSSIIIIIIIIIIIIIIIVVVVVVVVVVVVVEEEEEEEEEEEEEEEEE!!!!!!! :grinning_face_with_smiling_eyes: :smiling_face_with_open_mouth_closed_eyes: :grinning_face_with_smiling_eyes:
-
@NINJA I know, strange hahaha but better than DT stand I think
@Louis-James anyone know much about fitting a battery? I just want to do a lights and PV test.. I think you can connect it to the loom r/s of flywheel
-
@Louis-James anyone know much about fitting a battery? I just want to do a lights and PV test.. I think you can connect it to the loom r/s of flywheel
-
@Louis-James does it have the three white wires coming from the stator? You'd need them and a voltage regulator to convert the output from ac to dc.
-
@DTR-NSR I'll have another look but it has a voltage regulator already
So hopefully the main part of the project will be done this week.
Got the oil tank all set up nicely.
I had to extend one of the coolant hoses as was way too short.
This fairing bracket I ordered was no longer available so made one myself.
As you can see the fuel tank is in amazing condition for age.. didn't even powdercoat it..
All the colours are colliding and making a nice 90s mess haha just as I wanted.
The fairings are ready to collect from the body shop
-
So hopefully the main part of the project will be done this week.
Got the oil tank all set up nicely.
I had to extend one of the coolant hoses as was way too short.
This fairing bracket I ordered was no longer available so made one myself.As you can see the fuel tank is in amazing condition for age.. didn't even powdercoat it..
All the colours are colliding and making a nice 90s mess haha just as I wanted.
The fairings are ready to collect from the body shop
-
-
@Calum cheers Cal. Did you notice the paint has fibre pattern? Just waiting for the indicators before I can put headlight and rear fender on.. then sort the brakes and chain
-
We'll here we are.... Fairings and graphics.
-
@NINJA thanks:) you can get it in eBay, I got 6 fairly large sheets for £12
-
@NINJA can't fit the exact listing but this is similar
https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F130796418818 -
@NINJA can't fit the exact listing but this is similar
https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F130796418818 -
Well this was annoying.. normally wemoto is good but they sent the wrong brake lines... Says on the box dt200wr 3xp.
Will not fit. Even if routed differently.
Thinking about 1990-96 yz250 lines now
Got the calipers sand blasted and painted up.
Finally the clutch cable came
Only a few bits holding me up.
New chain rollers came.
-
New horn
New yz250 rear brake line
New yz250 neon pink disc guard (matched shock spring)
And the FMF fatty. Can't believe how much thicker the metal is to the DEP.Just the final bits and pieces need doing. Still waiting for the indicators and custom front brake hose.
-
New horn
New yz250 rear brake line
New yz250 neon pink disc guard (matched shock spring)
And the FMF fatty. Can't believe how much thicker the metal is to the DEP.Just the final bits and pieces need doing. Still waiting for the indicators and custom front brake hose.
-
New horn
New yz250 rear brake line
New yz250 neon pink disc guard (matched shock spring)
And the FMF fatty. Can't believe how much thicker the metal is to the DEP.Just the final bits and pieces need doing. Still waiting for the indicators and custom front brake hose.
