Aprilia RS125 2010 Spain's no.1

[DanRacing]

@pedrobatista10 said in Aprilia RS125 2010 Spain's no.1:

And about the bike dying on 6k rpm, sound restricted for you?

I wouldn't port that cylinder unless it was for racing, because it's already a pretty balanced port map great for street.
Porting the cylinder is just going to make it less usable on the streets, your mechanics port job will probably just be widening the ports or just raising the exhaust a little bit as most mechanics don't really study or even care about the angles and then a cylinder just ends up loosing bottom end with some gains on top end but not worth the lost low end power for street.

[Calum]

@DanRacing I concur.

If this were me, I'd ride the bike with the cylinder bone stock, and then decide if further refinements are needed. Don't just port unless you need to.

[stinkwheeler]

The biggest difference in power i noticed on the rs was getting the squish bang on 1mm also if you dont have a lot of hills lightening the flywheel seemed to help a little for me ...

[Calum]

@stinkwheeler Yeah, but he's already got the Italkit Head for that Italkit cylinder. So I think he's got that covered. Whack in a Zeel and that'll remove the restriction at 6K rpm.

Throw it all together and you'll have a very capable 125.

[pedrobatista10]

next month i will buy zeeltronic or ignitech. i would like to know your opinions about both of them.

ignitech is cheaper. but zeel have more reputation in rs 125 bikes.

what you guys think? worth to pay the difference?

[stinkwheeler]

The zeeltronic is a more tried and tested system for the rs with good results and lots of options for shift light quickshift and the handheld programmer is verry easy to use ... so i would go with the zeeltronic... im not sure about ignigtech ...

[pedrobatista10]

hi, new month. time for new stuff for my aprilia.

today i spoke with Borut from zeeltronic, and i already have price. i just have a question, whats the best option handheld programmer or PC USB programmer?

other thing, opinions on TYGA racing step kit CNC. im interested but want to know some reviews.

[NINJA]

@pedrobatista10 Tyga make excellent quality parts and have a very good reputation. :grinning_face_with_smiling_eyes: :grinning_face_with_smiling_eyes: :grinning_face_with_smiling_eyes:

[Calum]

@pedrobatista10 Handheld all day long mate.

I've got the TYGA CNC Rearsets. They're gorgeous. They also do carbon fibre heel plates to go with them. Really finishes them off!

[pedrobatista10]

@Calum thank you for your feedback. i will order carbon part too, look nice.

[Calum]

Just to give you an idea of what they look like...

[pedrobatista10]

@Calum Amazing!! i will put full tyga carbon parts like your bike with time

[pedrobatista10]

just little update with 2 photos of my aprilia and dtx

while i wait for more parts

[NINJA]

@pedrobatista10 Did you buy your RS parts from MMGRacing???

[pedrobatista10]

@NINJA sorry for late reply, i didnt see notification.

yes i bought from that. its a spain shop.

[pedrobatista10]

Finally my zeeltronic arrived.

[NINJA]

@pedrobatista10 Where did you buy it from bud? And the best bit is it's plug n' play!!!
:grinning_face_with_smiling_eyes: :grinning_face_with_smiling_eyes: :grinning_face_with_smiling_eyes:

[pedrobatista10]

@NINJA i bought directly from zeeltronic. borut is the name of the guy.

[NINJA]

@pedrobatista10 COOL let us know how the bike performs once it's fitted.

[pedrobatista10]

i still need to buy more parts, before sending to mechanic.

i plan to buy first melloti handle bars,fork top melloti, tyga racing step kit cnc. then i will tell mechanic to fit it all.

btw, @Calum what you think of melotti handle bar and forktop? you have any opinion?