Dt200 engine build

[autovictor]

is it possible to fit the re/x stator on the dt/wr 200 crankshaft? does anybody did the 200 conversion on a re/x?

[Calum]

@autovictor The RE/X Flywheel goes on reverse to that of the DTR and has the starter motor teeth.

So at a guess, I'd say it's not possible without modifications. Woodruff key will be in the wrong place and taper of the crank will be wrong.

[oldman]

Joining the 200 club! Be a while though, got my holiday to pay for first!

[Challenger]

@oldman nice to see that cylinder on the forum

[pedrobatista10]

guys how much cost 3xp barrel at the moment? saw one on ebay from greece for 215€ ( need to be repaired i guess)

[Challenger]

@pedrobatista10 there are really a lot of variables when it comes to the condition of a barrel

[pedrobatista10]

@Challenger this one, i think its the only one for sale on ebay.

https://www.ebay.com/itm/yamaha-wr200-cylinder-barrel-barel-jug-dt-4bf-3xp-wr-200-wr200rd-dt200-dt200wr/143238727899?_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D20160908105057%26meid%3D004f0a5e233846359e4fc32bca6e4f96%26pid%3D100675%26rk%3D1%26rkt%3D15%26mehot%3Dnone%26sd%3D143238727899%26itm%3D143238727899%26pmt%3D0%26noa%3D1%26pg%3D2380057&_trksid=p2380057.c100675.m4236&_trkparms=pageci%3A6ccdbf0e-46a6-11ea-a919-74dbd18033a0|parentrq%3A0bfd5ebd1700a861903b0e28ffee23c0|iid%3A1

[Calum]

No way, at that price I'd give it a miss!

You definitely want the valve & head.

The crack needs welding, it'll need replating. I've seen entire engines go for not much more than that.

Not worth the gain in my opinion.

[pedrobatista10]

look at this beautiful kit, not cheap but looks very good

https://www.olx.pt/anuncio/kit-cilindro-200-para-yamaha-dt-125-r-dtr-tzr-rz-IDEht5T.html

[Calum]

Missing the head. If that had the head it would be more of a goer.