Swing arm & linkage seals
-
Says it all really.
I’ve looked about for the spindle endcap and Swingarm and linkage seals but have drawn a blank. I can find the needle bearings, but that’s all she wrote. Can’t even find the linkage bearings...
Little help please?...P.S. Rebuild kits for DT200R rear shocks? I found the fountain of youth but this is beyond my googlability 🤪
-
Says it all really.
I’ve looked about for the spindle endcap and Swingarm and linkage seals but have drawn a blank. I can find the needle bearings, but that’s all she wrote. Can’t even find the linkage bearings...
Little help please?...P.S. Rebuild kits for DT200R rear shocks? I found the fountain of youth but this is beyond my googlability 🤪
-
Cheers guys. I don’t seem to have a of luck (the good stuff!!) with searches...
It’s like the rear shock stuff. They can all be dismantled, but if you can’t find the seal head or piston head you can’t repair them. Even a bump stop is beyond my abilities to find!...
-
@SpookDog said in Swing arm & linkage seals:
The Wemoto kit only covers the swingarm to frame bearings and seals
You need to order the rest from Fowlers or CMSNL
There is occaisionally a company on Ebay selling the pivot kit for the linkage at around £110 which is slightly cheaper than genuine but cant vouch for the quality
I've gone with Wemoto and Fowlers for my TDR (same as DTR) and all in I think its approx £250 for all the bearings, bushes and seals etc. I also treated the bike to a YSS shock which was another £200 but way better than the stock unit
Not a cheap job
