So Close!...
-
wrote on 24 Oct 2023, 19:40 last edited by
Is it the one from ebay recently posted to another thread?
-
Sorry for tardy reply, yes it is £155 posted.
Are all 170 Athenas fitted with an o-ring head? Or are some fitted with a gasket?…
Yeah, it’s going to live on the Dtr…
wrote on 27 Oct 2023, 15:39 last edited byCan anyone please let me know where I can get head gaskets for the 170 top end?
Also if there are o-ring upgrades?..
Ta! -
wrote on 27 Oct 2023, 18:09 last edited by
PJME. Never needed an O-Ring upgrade. I've not had any issues with the head gaskets for my 170 kit.
-
wrote on 28 Oct 2023, 08:05 last edited by
Ah right. No, I didn't realise that the Athena kit used an O Ring for the above and consequently it leaked coolant
-
Ah right. No, I didn't realise that the Athena kit used an O Ring for the above and consequently it leaked coolant
-
I though you had an oring conversion on your kit?
I didn’t know that they all used gaskets , doh!wrote on 31 Oct 2023, 18:53 last edited byI’ve been getting a niggle the last few days. When I fitted a new pilot jet a month or three ago the rev pickup was so much improved that my little bike was actually popping unintentional little wheelies when I was pulling away, even cold. Just lately it’s been getting unresponsive, you can hear the ‘bore noise’ from the carb without the engine picking up. If that makes sense?
Any ideas wtf it’s caused by?
I’ve been getting crap in the carb problems forever, usually it’s the pilot that gets affected. Does this sound like main jet obstruction?Any help, Yada ~ yada…
-
wrote on 31 Oct 2023, 20:08 last edited by
My Cagiva is running like shit at the moment.
Built that engine the summer and it was legit rapid. Went to Belgium a few weeks ago and come back and the bike ran so bad. Spent the last two weekends jetting it. It can't be the fuel since that's the same before I went to Belgium, however the temperature has dropped...
-
wrote on 31 Oct 2023, 21:59 last edited by
Might have to upjet in this weather mate, my French import bike loved to run on 210 in summer and 22.5 pilot when winter came, didn’t like it at nightime I had to go up one jet on each
-
My Cagiva is running like shit at the moment.
Built that engine the summer and it was legit rapid. Went to Belgium a few weeks ago and come back and the bike ran so bad. Spent the last two weekends jetting it. It can't be the fuel since that's the same before I went to Belgium, however the temperature has dropped...
wrote on 1 Nov 2023, 04:13 last edited by SpookDog 11 Jan 2023, 04:14It’s a weird one! I cleaned the carb out again. Another tiny little bead of shitty/water in the bottom of the bowl. Not even half a match head. Less than usual.
This time I junked the air filter because it was starting to disintegrate. I thought I had a good NOS one but that was crumbling as well! It’s definitely running and picking up a lot better without the old filter. Seems it’s down to the fact that it really doesn’t like the damp atmosphere this weather is making. Way too humid…
Too much rain! I didn’t even consider a low pressure atmosphere!…It used to really love the cool dry early 5o’clock morning air a few months ago! You could really feel the extra whump to each charge of mixture. Especially at low rpms…
-
Might have to upjet in this weather mate, my French import bike loved to run on 210 in summer and 22.5 pilot when winter came, didn’t like it at nightime I had to go up one jet on each
-
It’s a weird one! I cleaned the carb out again. Another tiny little bead of shitty/water in the bottom of the bowl. Not even half a match head. Less than usual.
This time I junked the air filter because it was starting to disintegrate. I thought I had a good NOS one but that was crumbling as well! It’s definitely running and picking up a lot better without the old filter. Seems it’s down to the fact that it really doesn’t like the damp atmosphere this weather is making. Way too humid…
Too much rain! I didn’t even consider a low pressure atmosphere!…It used to really love the cool dry early 5o’clock morning air a few months ago! You could really feel the extra whump to each charge of mixture. Especially at low rpms…
wrote on 4 Nov 2023, 17:37 last edited by SpookDog 11 Apr 2023, 17:43I need a gudgeon/wrist pin for the Athena piston. Anyone have an old one spare or know where to get? I need to know the size as well. if I have to order 1 …
I believe it’s 55mm x 15mm but am not 100% sure…
-
I need a gudgeon/wrist pin for the Athena piston. Anyone have an old one spare or know where to get? I need to know the size as well. if I have to order 1 …
I believe it’s 55mm x 15mm but am not 100% sure…
…