Chain and sprockets
-
Hi guys, looking to buyba chain & sprocket kits for my 95 dt with a 88 3dp engine, all the kits say different years (90-03, 88-95 etc) all contradict each other, is it just a tooth difference? Can anyone advise please, also I'm running 98 wheels. Thanks guys any help will be appreciated
-
Hi guys, looking to buyba chain & sprocket kits for my 95 dt with a 88 3dp engine, all the kits say different years (90-03, 88-95 etc) all contradict each other, is it just a tooth difference? Can anyone advise please, also I'm running 98 wheels. Thanks guys any help will be appreciated
@rking7888 I would have thought it'll just be the tooth difference. The output shafts are the same from 88-07. The engine only went through minor revisions, so any sprocket from any year should fit.
-
Hi guys, looking to buyba chain & sprocket kits for my 95 dt with a 88 3dp engine, all the kits say different years (90-03, 88-95 etc) all contradict each other, is it just a tooth difference? Can anyone advise please, also I'm running 98 wheels. Thanks guys any help will be appreciated
Make sure you get the rear sprocket with six bolts...
There is a gold o-ring chain and JT sproket set on fleabay for about £45. I’ve had 4000 trouble free miles from it. Just adjusted it every 1000 mile or so...
Just search for JT oring chain dtr125
-
Make sure you get the rear sprocket with six bolts...
There is a gold o-ring chain and JT sproket set on fleabay for about £45. I’ve had 4000 trouble free miles from it. Just adjusted it every 1000 mile or so...
Just search for JT oring chain dtr125
-
@spookdog
Thanks for your help mate, that's the kit I was looking at, seemed well cheap, I swear I payed like 70 quid for my cr chain. I wasn't aware there was a bolt Change on the rear wheel I thought the hubs never changed?@rking7888
Also wasn't sure between the o ring set or the std d.i.d set -
@rking7888
Also wasn't sure between the o ring set or the std d.i.d setI just saw loads of ’dtr’ sprockets Being sold with 4 bolt holes, they looked like dtlc or yz
Go with O-rings please! X section if they do them. They are both better
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login