Chain and sprockets
Hi guys, looking to buyba chain & sprocket kits for my 95 dt with a 88 3dp engine, all the kits say different years (90-03, 88-95 etc) all contradict each other, is it just a tooth difference? Can anyone advise please, also I'm running 98 wheels. Thanks guys any help will be appreciated
Calum last edited by
@rking7888 I would have thought it'll just be the tooth difference. The output shafts are the same from 88-07. The engine only went through minor revisions, so any sprocket from any year should fit.
Make sure you get the rear sprocket with six bolts...
There is a gold o-ring chain and JT sproket set on fleabay for about £45. I’ve had 4000 trouble free miles from it. Just adjusted it every 1000 mile or so...
Just search for JT oring chain dtr125
Thanks for your help mate, that's the kit I was looking at, seemed well cheap, I swear I payed like 70 quid for my cr chain. I wasn't aware there was a bolt Change on the rear wheel I thought the hubs never changed?
Also wasn't sure between the o ring set or the std d.i.d set
I just saw loads of ’dtr’ sprockets Being sold with 4 bolt holes, they looked like dtlc or yz
Go with O-rings please! X section if they do them. They are both better