Project SMX [Pic Heavy]
-
Thanks to the good weather I took advantage & cleaned, stripped down and resprayed a bunch of fiddly little parts today.
I also cleaned the 2 rear shocks I have in between coats of paint, I just need to give the mounts a quick respray and then pick the best one already for re-fitting. My fuel tank was in a pretty sorry state and my OCD also kicked in, so I decided to respray it. The original is just untreated plastic and although you don't really see a lot of it as it's underneath the radiator shrouds and seat. But hey-hoo I still know it's there and it looked tatty as bare plastic and also has some paint stains on her, so after several attempts and much rubbing down and respraying I finally got a decent finish on her!!! :grinning_face_with_smiling_eyes:
Before;
Rubbed down;
After;
Not easy things to respray at home, I kept getting one side mint and the other side not so good. I guess I was getting too much over-spray which caused some problems, plus it was a very hot day so the paint dried super quick, it's like spraying a pyramid in reality. She's not perfect but will do for now and a vast improvement on the original for-sure. I'll let the paint cure for a week and then give her the final treatment of some petrol resistant lacquer to finish her off with, which should help protect her from any mishaps. :smiling_face_with_open_mouth:
-
@Glynn123 Nope she's a keeper!!! :grinning_face_with_smiling_eyes: :smiling_face_with_heart-eyes: :smiling_face_with_sunglasses: :grinning_face_with_smiling_eyes: :smiling_face_with_heart-eyes:
-
@NINJA just remember to use premium fuel as the ethanol in cheap stuff can distort the plastic
Looking sweet though
@finnerz89 I will only be using Shell V-Power in my baby. :grinning_face_with_smiling_eyes: :smiling_face_with_sunglasses: :grinning_face_with_smiling_eyes:
-
@finnerz89 I will only be using Shell V-Power in my baby. :grinning_face_with_smiling_eyes: :smiling_face_with_sunglasses: :grinning_face_with_smiling_eyes:
-
A small update, I managed to get in a few hours this afty and cleaned the forks up, polished the stanchions as best I could and resprayed the dropouts. The stanchions have some marks on them, which would not come out sadly, plus they are ribbed so that made it even harder to get a decent finish on em. So their as good as they will get, but most of these marks are not really seen which is handy.
I then slid the yokes back on to test fit it all;
i didn't realise that the forks are Marzocchi units;
SEDUCED BY THE DARK SIDE!!!
-
A small update, I managed to get in a few hours this afty and cleaned the forks up, polished the stanchions as best I could and resprayed the dropouts. The stanchions have some marks on them, which would not come out sadly, plus they are ribbed so that made it even harder to get a decent finish on em. So their as good as they will get, but most of these marks are not really seen which is handy.
I then slid the yokes back on to test fit it all;
i didn't realise that the forks are Marzocchi units;
-
@NINJA Yes, it is the same on the Cagivas as well!
Looking clean. Small touches like that make a big difference
-
@declan said in Project SMX:
@NINJA it’s always harder to work with when it’s ribbed
Are we talking bike parts or condoms here??? :grinning_face_with_smiling_eyes: :smiling_face_with_open_mouth_closed_eyes: :smiling_face_with_open_mouth_cold_sweat: :face_with_tears_of_joy:
SEDUCED BY THE DARK SIDE!!!
-
@declan said in Project SMX:
@NINJA it’s always harder to work with when it’s ribbed
Are we talking bike parts or condoms here??? :grinning_face_with_smiling_eyes: :smiling_face_with_open_mouth_closed_eyes: :smiling_face_with_open_mouth_cold_sweat: :face_with_tears_of_joy:
-
@declan said in Project SMX:
@NINJA how very dare you!!
Yes, this is getting a little off topic now...
@declan was quite clearly talking about the bike parts.
@NINJA Let me know if you want me to tidy up the thread.P.S. I was messing about the off topic. But do let me know if you want me to clean up the thread.
Always Originate, Never Pirate!
-
@declan said in Project SMX:
@NINJA how very dare you!!
Yes, this is getting a little off topic now...
@declan was quite clearly talking about the bike parts.
@NINJA Let me know if you want me to tidy up the thread.P.S. I was messing about the off topic. But do let me know if you want me to clean up the thread.
-
@declan said in Project SMX:
@NINJA how very dare you!!
Yes, this is getting a little off topic now...
@declan was quite clearly talking about the bike parts.
@NINJA Let me know if you want me to tidy up the thread.P.S. I was messing about the off topic. But do let me know if you want me to clean up the thread.
-
@Calum Just boys being boys and having a bit of harmless fun. :grinning_face_with_smiling_eyes:
Your call bud, but if it helps the website/server etc then clean away dude!!!
-
I've been busy cleaning and spraying up various parts, I'll take some more pics when I've got more done, but here's one to keep y'all going;
I also started to clean the engine and took the crank cases and head off to inspect the engines internals. I have to say my engine looks very good inside, plus the barrel and piston both look pretty damn good too. The previous owner had the engine rebuilt, with a new Mitaka head and piston, which looks like it's not covered too many miles;
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login