Dtx Project Codename Moneypit



  • @Zrako Turning Tuning zone engine probably the best bet.

    Bent selector forks. That is only going to happen on faulty installation surely. Thst or you have been crazy shifting. I have ran my dt without a clutch for months with no issues.



  • Well , today Im finished my USD forks conversion on my "moneypit DT " 😂. I've been working on it for a few weeks... firstly Im bought Ktm exc 300 forks from 2002 and same seller was selling ktm 450 forks from 2003 too so ended up eith 2 sets Im thought they are exactly same 😂 silly. Liked the 450 ones I think they are 48mm so decided to put them on. And will make everything required to direct fit on Dt the other ones 300 for sale. Measured everything 100 times and even after that the machined components wasnt 100% so I had to modify them after 😂 typical for me 😂
    Here if few pics from my garage , going to test ride and adjust them tomorrow.

    0_1504744534342_20170907_013524.jpg

    0_1504744589498_20170810_235910.jpg

    0_1504744619278_20170811_004748.jpg

    0_1504744648440_20170812_180039.jpg

    0_1504744673121_20170814_074227.jpg

    0_1504744689968_20170814_074337.jpg

    0_1504744719744_20170814_152336.jpg

    0_1504744748312_20170818_224435.jpg

    0_1504744791376_20170819_214833.jpg

    0_1504744865124_20170907_014057.png

    0_1504744887002_20170821_155344.jpg

    0_1504744903197_20170821_184117.jpg

    0_1504744928500_20170824_212436.jpg

    0_1504744945730_20170824_220516.jpg

    0_1504744975606_20170901_193152.jpg

    0_1504744997278_20170901_193640.jpg

    0_1504745013557_20170903_212655.jpg

    0_1504745051448_20170906_225708.jpg

    0_1504745068047_20170906_225738.jpg

    0_1504745078727_20170906_225824.jpg

    0_1504745088411_20170906_225859.jpg

    Brake line and speedo cable is a bit shorter than it should be but its ok adjusted. Now just need upgrade the wrap around handguards and thats it. Sorry for so many pics 😁 hopefully you will like it guys because I love it 😄


  • Global Moderator

    Very nice man. You've got plenty of room on that Speedo bracket, you could fit a few more bits 😉 I've always wanted to fit a clock but haven't got round to it yet!



  • That looks awesome mate. Bet it corners like a dream now!



  • @zrako YES MATE!

    Loving that. Really nice install on the forks.



  • Thanks guys , cant wait to go test it properly but raining like crazy every 10 minutes 😐



  • Your pictures seem to be blocked by my work fire wall so I cannot see them but it might be an idea to do a write up on the fork install to help others who want to do a similar job.



  • @nottsbiker yeah trying to get the drawings ready as all them I made was wrong at some stage I had to modify the parts on the go 😁 but good idea , i will try to get it together and write a small step by step tutorial 😊



  • @nottsbiker I've already done this mate it is in the tutorial section



  • Ok thanks 🙂


Log in to reply