-
@finnerz89 absolutely love it .
What about kickstart lever? Im looking for shiny alternative .
-
@Zrako Yeah I was thinking about this.
I believe Apico do some lovely levers for the YZ. They'll be a hell of a lot lighter too!
But will it fit the DT.
I need to borrow my brothers YZ lever to find out.
-
@finnerz89 Im just added the kickstart to the dtx as I love the kickstarts on the bikes but mainly because I had a lot troubles with starter. It decided to break right in the mot centre. And was tired of bumpstarting haha
-
i know this is a old thread but what year yz stuff acutally fits lol
-
I’m running an anodised folding pitbike selector it’s a good upgrade from stock with a bigger tip I’ve seen the apico ones give out after a while personally I wouldn’t use one after what I’ve seen of them
-
Honda CR85 Apico Gear lever fits.
-
@shellatit all bikes I’ve had/ seen have universal selectors
-
im just after something abit nicer then original for this bike
-
@shellatit Dependant on what you're looking for there are many gear levers for other bikes which will fit the DT. There are also many aftermarket levers as well as OEM levers which are of a similar shape to the DT's. I would suggest that you search on ebay or motocross/enduro websites and look for a lever of a similar shape. Or search for dirt/pit-bike levers as they seem to be 10_a_penny. So long as the shape, length and spline sizing are correct, then it will fit with no issues and there are many to choose from.
For example I couldn't find a decent one for my Aprilia MX 125 and searched as described above and eventually I found this bad boy, which fits perfectly and looks the mutts_nutts too!!! :grinning_face_with_smiling_eyes: :grinning_face_with_smiling_eyes: :grinning_face_with_smiling_eyes:
A nice quality kick start lever such as these, would match that gear lever and look awesome too;
-
@shellatit recent post states 05-15 yz
-
@shellatit unsure I got that info from a recent post
-
I re build alot of WR 125 r and x KTM EXC KTM EGS husky and DTRs and i have found on my WRS and DTRs any thing with a 10 ml or 12ml gear shaft spine depending how much the teeth have worn will fit most DT 125 R and RE ,When there from Yamah just make sure the curv is out far enough not to catch the case
-
@Bentley now then mate can ya send me a link for where ya got that leaver mate where i get mine are out of stock..i have a group on facebook if you would like to take a look ..https://www.facebook.com/groups/3063750823943880/
-