My dt125r/wr200 project
-
@darty it was vapour blasted after so it should be ok fingers crossed, what would you suggest waiting awhile to see if anything comes through the primer before painting? I'm not in a rush altho i have pretty much everything to build it I'd just rather do it properly first time round
-
@andrewj1680 I have no experience with this but you should wait no sense potentialy waisting time and materials
-
First rear swingarm fitup to check clearance before paint
-
-
-
Yes, that Swingingarm and shock are gorgeous?
They were fitted to the WR? Lush.
-
@calum yes mate was hoping to get the forks in place too but i had both stems pressed out and the dt stem is actually bigger in diameter so currently having the hole bored to fit the stem
-
-
Looking forward to seeing this coming together.
-
Cant beat a good kitchen build lol
Looks like you are doing a proper job mate
-
does the stock dt wheel fit in that wr swing arm?
-
It does yes
-
Is the WR swingarm longer than the DTR one as it looks longer?
Btw All Balls sell a complete overhaul kit for the WR via ebay for approx £60 which must be cheaper than Yamaha.
-
-
Looking good so far
How much did the work cost for the tuning?
-
He charges £170 including postage back to you but he does do a good job it totally changed my dt125r it was like a different bike
-
@andrewj1680 I can't say I really notice much of a difference on my bike. I seriously must not have it set up properly
-
@calum my bike was seriously gutless I thought maybe it had been treated like a baby all it's life and having only done just over 4000miles it wanted a good thrashing to liven it up but it never did seem to break free, once I had the cylinder and head done it pulled hard for a 125 anyway lol
-
@andrewj1680 Right, makes sense.
My bike already had zeeltronic and I thought it pulled fairly hard regardless.
-
@calum maybe that's why you didn't feel much from it as I know with zeeltronic you can programme the way the powervalve comes in so it comes in stronger where as I think Yamaha bring it in gradually, I might not feel much difference from the 200 being done as my 125 didnt have the servo fitted so when the powervalve does come on it comes on strong anyway where as I'm running the 200 on the wr loom and management along with the 5 wire servo