Does a rich pilot effect riding
-
@irongamer727 I can tell it’s running rich struggles to rev cleanly mainly from no revs to about quarter it splioges oil out the rail pipe and develops a littl splutter when coming off the gas and also struggles for Lower down power
wrote on 16 Feb 2018, 19:03 last edited by@declan allright, I think a smaller jet will suffice.
-
@declan allright, I think a smaller jet will suffice.
wrote on 16 Feb 2018, 19:04 last edited by@irongamer727 well the description of the carb says 38 pilot but it has a 50 in mine so I’ll just get a 38 like it should have and it should be good thank you for your time mate
-
@irongamer727 well the description of the carb says 38 pilot but it has a 50 in mine so I’ll just get a 38 like it should have and it should be good thank you for your time mate
wrote on 17 Feb 2018, 14:15 last edited by@declan so it turns out the pilot was a38 I was looking at the wrong jet lol so I put the one out of the stock carb which iirc is a 32 and it only runs slightly better to get the power right I have to properly lean the af screw out but if I leave it ticking over it needs the smoke clearing out before it can ride even if I leave it for say 30 seconds I’m starting to wonder if I over mixed my 2 stroke oil
-
@declan so it turns out the pilot was a38 I was looking at the wrong jet lol so I put the one out of the stock carb which iirc is a 32 and it only runs slightly better to get the power right I have to properly lean the af screw out but if I leave it ticking over it needs the smoke clearing out before it can ride even if I leave it for say 30 seconds I’m starting to wonder if I over mixed my 2 stroke oil
wrote on 17 Feb 2018, 14:22 last edited by@declan there's only one way to find out!
-
@declan there's only one way to find out!
wrote on 17 Feb 2018, 14:23 last edited by@irongamer727 I guess so
I think I need to find someone that knows jetting tbf to get it spot on -
@irongamer727 I guess so
I think I need to find someone that knows jetting tbf to get it spot onwrote on 17 Feb 2018, 14:24 last edited by@declan what 70cc cylinder? No Airsal I hope
-
@declan what 70cc cylinder? No Airsal I hope
wrote on 17 Feb 2018, 14:25 last edited by@irongamer727 I’m afraid your not gonna like this it’s a 50 pound kit off eBay made in Poland
-
@irongamer727 I’m afraid your not gonna like this it’s a 50 pound kit off eBay made in Poland
wrote on 17 Feb 2018, 14:28 last edited by@declan a well, I mean if everything is installed correctly and the reeds etc are fine there shouldn't be a problem jetting it. Have you checked the spark plug? Perhaps it's the culprit?
-
@declan a well, I mean if everything is installed correctly and the reeds etc are fine there shouldn't be a problem jetting it. Have you checked the spark plug? Perhaps it's the culprit?
wrote on 17 Feb 2018, 14:58 last edited by@irongamer727 I put. A really old rusty plug in it’s yhe only one I had the bike starts first kick if I turn the af screw all the way in the bike dies as it should right?
-
@irongamer727 I put. A really old rusty plug in it’s yhe only one I had the bike starts first kick if I turn the af screw all the way in the bike dies as it should right?
wrote on 17 Feb 2018, 15:06 last edited by@declan make it fair and change to a decent plug. When you turn the screw in you get a richer mixture. (Less air) give the entire carb a good clean.
-
@declan make it fair and change to a decent plug. When you turn the screw in you get a richer mixture. (Less air) give the entire carb a good clean.
wrote on 17 Feb 2018, 15:07 last edited by@irongamer727 I’ve cleaned it out properly and yes clean plug will be got and fresh fuel tonight so I know I didn’t screw up the premix
-
wrote on 17 Feb 2018, 15:09 last edited by
Easiest way to figure out if its over fueling is to stifle the intake, if the problem worsens then you got too much fuel, if it improves then you haven't got enough fuel.
-
Easiest way to figure out if its over fueling is to stifle the intake, if the problem worsens then you got too much fuel, if it improves then you haven't got enough fuel.
-
wrote on 17 Feb 2018, 15:38 last edited by
@calum I put a latex Glove over the snorkel it ran ok on idle but smoked loads and wouldn’t rev much it actually replicated the problem but on a worser scale so maybe the stock airbox is too restrictive? You can barely fit your pinky finger in the snorkel
-
@calum I put a latex Glove over the snorkel it ran ok on idle but smoked loads and wouldn’t rev much it actually replicated the problem but on a worser scale so maybe the stock airbox is too restrictive? You can barely fit your pinky finger in the snorkel
-
@declan a latex glove! What??? Mate you justv want to lightly restrict the air flow not block it completely, you want something that breathes like a cotton sock.
-
wrote on 17 Feb 2018, 15:55 last edited by
