Power valve issue
-
@calum do you have a link for how to remove power valve at all?
@thechompster No, just take the two powervalve end caps off. The offside powervalve housing has a bolt to keep the two pieces together, make sure you don't lose the locating dowels as they're prone to falling out. You'll want to lubricate it with WD40.
-
@thechompster No, just take the two powervalve end caps off. The offside powervalve housing has a bolt to keep the two pieces together, make sure you don't lose the locating dowels as they're prone to falling out. You'll want to lubricate it with WD40.
-
@calum ok thanks for the help. With give it a go.
-
Took the exhaust off. A bit dirty in there but rotates easy enough. Goes through the cleaning process nice and easy so all I can do now is change the servo and hope it sorts it.
-
Odd that it'll do the cleaning cycle fine but not run right.
I'd be more inclined to say faulty CDI more than anything. I guess these bikes are just starting to show their age.
@calum yeah I guess they are.apart from that it runs lovely. Will change the servo. If that doesn't do it just the cdi left I guess.
-
A friend had a faulty servo, sometime during a ride where the PV was open, it would leave it open. Other times just seem erratic. I believe the gears in the servo was toast.
-
A friend had a faulty servo, sometime during a ride where the PV was open, it would leave it open. Other times just seem erratic. I believe the gears in the servo was toast.
@jens-eskildsen ok thanks mate. Very helpfull
Will try another servo then and see what happens. -
@jens-eskildsen ok thanks mate. Very helpfull
Will try another servo then and see what happens.@thechompster just out of interest, what spark plug are you running??
-
@thechompster just out of interest, what spark plug are you running??
@mitch_350z iridium spark plug
-
@mitch_350z iridium spark plug
@thechompster does it have the resistor in it the 'r' in the spark plug type as this can cause issues with the operation of the valve
-
@thechompster does it have the resistor in it the 'r' in the spark plug type as this can cause issues with the operation of the valve
@mitch_350z the one below. Br9eix.
-
Me too, br9eix
-
@mitch_350z the one below. Br9eix.
@thechompster my mistake, I meant without the 'r' lol if it hasn't got the resistor in it the valve finds a mind of its own. You can hear the exhaust note change as you ride
-
@thechompster my mistake, I meant without the 'r' lol if it hasn't got the resistor in it the valve finds a mind of its own. You can hear the exhaust note change as you ride
-
@mitch_350z I see. Where is the resister?
@thechompster I believe it’s built into the core of the plug
-
@thechompster I believe it’s built into the core of the plug
@declan yeah it is
-
I guess it's ok as it ran great with the power valve working spot on for a few weeks. Just got a cdi off eBay and a servo so will try the cdi first and see if it fixes it.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login