DTX 125 PRODJECT
-
@calum you see the problem was is i bought the dtx from a guy in Cornwall who mugged me off i think he had been riding it up and down the beach or through salt water and never cleaned it the mot list was huge i have never seen a frame this bad ... lots of tiny holes where it haddnt been welded properly from manufacturer but i took a wire brush grider to it cleaned it up had it shotblasted and powder coated and filled the frame with wax oil to seal it so it should be all good now .... but be careful buying bikes near the sea ... lesson learnt
@stinkwheeler Ah ryt, yeah that's common. Sea side vehicles have a hard time.
-
It didnt help these Spanish built bikes when the frames had next to no paint on them from new. Proper shoddy work leading to snapped bolt city later.
-
It didnt help these Spanish built bikes when the frames had next to no paint on them from new. Proper shoddy work leading to snapped bolt city later.
@scrimsmustang There is no doubt the Japanese built ones are better, but I didn't find too many issues with my RE.
-
@calum you see the problem was is i bought the dtx from a guy in Cornwall who mugged me off i think he had been riding it up and down the beach or through salt water and never cleaned it the mot list was huge i have never seen a frame this bad ... lots of tiny holes where it haddnt been welded properly from manufacturer but i took a wire brush grider to it cleaned it up had it shotblasted and powder coated and filled the frame with wax oil to seal it so it should be all good now .... but be careful buying bikes near the sea ... lesson learnt
-
@stinkwheeler i once saw this bike advertised as stolen??
-
@tdrgreg2 thats cool buddy the fact you saw it advertised as stolen the more people will recognise it although I'm sure its long gone ......... update just ordered the romeu exhaust today 250 quid will post pics of fitting when it arrives
-
@scrimsmustang @Calum which of the models are japanese and spanish?
-
@bananper any dtre or dtx is made in spain all of the dtr 125s were made in japan i belive
-
@stinkwheeler @Bananper Almost, I'm pretty sure the DTR's were switched over to Spanish in their later lives. 2000 onwards. Scrim would know the actual dates.
@calum my dtr i built was 2002 plate and was made in japan so I'd imagine it would be after that
-
So heres a small update ... still waiting on my exhaust from romeru guessing it takes a good few weeks to make i cant remember from last time .... but ive just ordered some custom graphics from ebay for 110 quid so hopefully the quality will be reasonable as good reveiws http://imgur.com/gallery/DQ05yRD ... going to order the zeeltronic in a week or too but with my first child on the way in a month so moneys tight ... as soon as thats done its a fatbar conversion on the cards pics to come
The hills are alive with the sound of ... braaaap baaaaap 😁
-
So heres a small update ... still waiting on my exhaust from romeru guessing it takes a good few weeks to make i cant remember from last time .... but ive just ordered some custom graphics from ebay for 110 quid so hopefully the quality will be reasonable as good reveiws http://imgur.com/gallery/DQ05yRD ... going to order the zeeltronic in a week or too but with my first child on the way in a month so moneys tight ... as soon as thats done its a fatbar conversion on the cards pics to come
-
@stinkwheeler Oh nice, unique graphics.
Fatbar was always dream for me. Worth the investment. Just make sure your cables are long enough.
@calum thanks for the heads up mate i didn't think about cable length
The hills are alive with the sound of ... braaaap baaaaap 😁
-
@calum thanks for the heads up mate i didn't think about cable length
@stinkwheeler Yeah the wider, higher bars, can result in the throttle cable being too short. It would either need rerouting, or a longer one being made up. Along with everything else.
Always Originate, Never Pirate!
-
@calum thanks for the heads up mate i didn't think about cable length
I did want to get the original graphics rather than these but worked out far too expensive and the headlight cowl graphics are now discontinued
-
@stinkwheeler Yeah the wider, higher bars, can result in the throttle cable being too short. It would either need rerouting, or a longer one being made up. Along with everything else.
@calum ahh thats cool will have to look at the throttle cable but going to get braided hoses for the brakes anyhow so that shouldn't be too much of a worry
-
@stinkwheeler Yeah the wider, higher bars, can result in the throttle cable being too short. It would either need rerouting, or a longer one being made up. Along with everything else.
-
Verry slow progress at the moment but hopefully will get some more pictures up this tuesday Wednesday.. the graphics turned up and are verry good quality for aftermarket ones ... I've also just purchased a kick start mech for £100 off ebay so will try and get that fitted this week but heres a little teaser http://imgur.com/gallery/pPa2cob
-
So a little later than planned my exhaust just turned up from Portugal http://imgur.com/gallery/lXDtKTq
Looks smart will polish it and get it fitted asap it seems it was sat in the post office for nearly 3 weeks and that it had an attempted delivery but they never left a ticket.... also just managed to get a dtx headlight from fowlers after having to return one as it was so badly packed it was broken when it arrived the second one wasn't packed much better but i can finally start getting it together now -
I also fitted some cheap chinese adjustable levers like an asv replica and there quite good for 15 quid odd to be honest I've had a set on my rs for a while... http://imgur.com/gallery/bJkW6be ...
The hills are alive with the sound of ... braaaap baaaaap 😁
