DTX 125 PRODJECT
-
That's a stunning DTR, given the option id drop my RE Sm any day for a DTR converted to SM. But I've just got too much money and mods on the RE to sell now haha
@glynn123 was a nice dtr buddy it got stolen outside my house I'd give a good 3k for it back
but must move on and build this dtx now as it was the best thing i could find available for the money at the time i will build another dtr once I've finnished the dtx and sold my rs125 which i use as my daily
-
Yeah that's tidy.
The frames are pretty robust, I'd be surprised if it was rusted that badly that it needed welding.
The later frames are assembled in Spain where the paint is not as good as the Japanese ones. But get it powdercoated in the UK and it'll be better than OEM.
@calum you see the problem was is i bought the dtx from a guy in Cornwall who mugged me off i think he had been riding it up and down the beach or through salt water and never cleaned it the mot list was huge i have never seen a frame this bad ... lots of tiny holes where it haddnt been welded properly from manufacturer but i took a wire brush grider to it cleaned it up had it shotblasted and powder coated and filled the frame with wax oil to seal it so it should be all good now .... but be careful buying bikes near the sea ... lesson learnt
-
@calum you see the problem was is i bought the dtx from a guy in Cornwall who mugged me off i think he had been riding it up and down the beach or through salt water and never cleaned it the mot list was huge i have never seen a frame this bad ... lots of tiny holes where it haddnt been welded properly from manufacturer but i took a wire brush grider to it cleaned it up had it shotblasted and powder coated and filled the frame with wax oil to seal it so it should be all good now .... but be careful buying bikes near the sea ... lesson learnt
@stinkwheeler Ah ryt, yeah that's common. Sea side vehicles have a hard time.
-
It didnt help these Spanish built bikes when the frames had next to no paint on them from new. Proper shoddy work leading to snapped bolt city later.
-
It didnt help these Spanish built bikes when the frames had next to no paint on them from new. Proper shoddy work leading to snapped bolt city later.
@scrimsmustang There is no doubt the Japanese built ones are better, but I didn't find too many issues with my RE.
-
@calum you see the problem was is i bought the dtx from a guy in Cornwall who mugged me off i think he had been riding it up and down the beach or through salt water and never cleaned it the mot list was huge i have never seen a frame this bad ... lots of tiny holes where it haddnt been welded properly from manufacturer but i took a wire brush grider to it cleaned it up had it shotblasted and powder coated and filled the frame with wax oil to seal it so it should be all good now .... but be careful buying bikes near the sea ... lesson learnt
@stinkwheeler i once saw this bike advertised as stolen??
-
@stinkwheeler i once saw this bike advertised as stolen??
-
@tdrgreg2 thats cool buddy the fact you saw it advertised as stolen the more people will recognise it although I'm sure its long gone ......... update just ordered the romeu exhaust today 250 quid will post pics of fitting when it arrives
-
@scrimsmustang @Calum which of the models are japanese and spanish?
@bananper any dtre or dtx is made in spain all of the dtr 125s were made in japan i belive
-
@bananper any dtre or dtx is made in spain all of the dtr 125s were made in japan i belive
-
@stinkwheeler @Bananper Almost, I'm pretty sure the DTR's were switched over to Spanish in their later lives. 2000 onwards. Scrim would know the actual dates.
@calum my dtr i built was 2002 plate and was made in japan so I'd imagine it would be after that
-
So heres a small update ... still waiting on my exhaust from romeru guessing it takes a good few weeks to make i cant remember from last time .... but ive just ordered some custom graphics from ebay for 110 quid so hopefully the quality will be reasonable as good reveiws http://imgur.com/gallery/DQ05yRD ... going to order the zeeltronic in a week or too but with my first child on the way in a month so moneys tight ... as soon as thats done its a fatbar conversion on the cards pics to come
-
So heres a small update ... still waiting on my exhaust from romeru guessing it takes a good few weeks to make i cant remember from last time .... but ive just ordered some custom graphics from ebay for 110 quid so hopefully the quality will be reasonable as good reveiws http://imgur.com/gallery/DQ05yRD ... going to order the zeeltronic in a week or too but with my first child on the way in a month so moneys tight ... as soon as thats done its a fatbar conversion on the cards pics to come
@stinkwheeler Oh nice, unique graphics.
Fatbar was always dream for me. Worth the investment. Just make sure your cables are long enough.
-
@stinkwheeler Oh nice, unique graphics.
Fatbar was always dream for me. Worth the investment. Just make sure your cables are long enough.
@calum thanks for the heads up mate i didn't think about cable length
-
@calum thanks for the heads up mate i didn't think about cable length
@stinkwheeler Yeah the wider, higher bars, can result in the throttle cable being too short. It would either need rerouting, or a longer one being made up. Along with everything else.
-
@calum thanks for the heads up mate i didn't think about cable length
I did want to get the original graphics rather than these but worked out far too expensive and the headlight cowl graphics are now discontinued
-
@stinkwheeler Yeah the wider, higher bars, can result in the throttle cable being too short. It would either need rerouting, or a longer one being made up. Along with everything else.
@calum ahh thats cool will have to look at the throttle cable but going to get braided hoses for the brakes anyhow so that shouldn't be too much of a worry
-
@stinkwheeler Yeah the wider, higher bars, can result in the throttle cable being too short. It would either need rerouting, or a longer one being made up. Along with everything else.
-
Verry slow progress at the moment but hopefully will get some more pictures up this tuesday Wednesday.. the graphics turned up and are verry good quality for aftermarket ones ... I've also just purchased a kick start mech for £100 off ebay so will try and get that fitted this week but heres a little teaser http://imgur.com/gallery/pPa2cob