Yamaha DT 125R 1994 project

[jonne123]

Fixing the electric stuff nearly all bulbs were blown

Removing the leaking front forks

The oil wasn´t changed in long time

And that filthy front caliber from oil leaking all over the place

Changing the seals

[jonne123]

Cleaned brake caliper.

Broken speedometer place need to buy new wheel.

Diy quick throttle with zip tie glued no picture.

[Calum]

Caliper is looking healthier!

[jonne123]

Yes i cleaned brake with brake cleaner and with wire brush. The caliper i just used brake cleaner because it has paint.

[jonne123]

Bought blinkers and testing the wire lenght and fitment.

Cooland leaking need to fix that.

Why there is 2 wires to park bulb? It works but is park always on okay?

Dissambling horn for painting.

Painted

[jonne123]

Also here is video of it when i bought it. I bet you haven´t seen that moped that is on my channel.
https://www.youtube.com/watch?v=4OosJkBa6rY

[Calum]

Yeah that Suzuki is bad ass!

[jonne123]

And of course easy tuning capabilities for a death trap.

https://www.youtube.com/watch?v=RParzmhh2UU&t=0s
We also have every summer this "PV Forum`s speeding days event"
https://www.youtube.com/watch?v=VYENYD-84z4&t=0s

[Calum]

Haha that's brilliant.

[jonne123]

New rim + sparkplug 34e.

Still leaking without the engine running cant understand why

[jonne123]

Could someone identify what exhaust is this? https://www.tori.fi/vi/65670465.htm

[claws]

@jonne123 giannelli probably.

[Calum]

Or BigOne

[jonne123]

My ported suzuki pv moped: https://www.youtube.com/watch?v=Ds1trRkr22g

[jonne123]

So i had little worn rear tire so this happened... little backfire also. https://www.youtube.com/watch?v=GruRc--3zNA

[jonne123]

So i had engine failure and said what the heck i will rebuild it. and tune the bike up. Pictures coming!

[Calum]

Wow, why did the engine fail?

[SpookDog]

@Calum
Check out his pootube vid, then ask yourself why you asked ...
Sorry, did I miss your dry humour?

[Calum]

@SpookDog no I did see the video. Still though, a little burnout never hurt anyone

[jonne123]

So basically i was just revving the hell of it for about 20 seconds went driving and felt weird. Engine stalled kickstart stuck.

So i opened the engine and there was bearing pieces over piston so rod bearing failure. There was sand in engine via bad air filter from previous owner. Also the piston was ridden about 1500km and the ring cap was 0,7mm on the top one and 0,5mm bottom one. And the needle bearing was shot. So the engine would have failed eventually. I think i know now what the werid side noise was.
https://i.imgur.com/jsw8S7K.jpg

https://youtu.be/GrOBDzHtQpY