Giannelli vs stock

[declan]

@jonne123 all of them offer a power increase however if you want budget and power then gut your original exhaust

[claws]

@jonne123 ask your some motorcycle facebook group if they can sell a performance exhaust for dt125

[jonne123]

But i have full power 1994 that hasnt any restrictions?

[Calum]

@jonne123 Probably won't be that much in it then over a budget pipe. Usually it's the weight of the stock pipe that does it.

Bang for buck in my experience, is swapping the ignition system out for a Zeeltronic.

But I have no experience with the 94 CDI.

Tuning is an art, and not a single component on its own will make that much of a difference. But getting a collection of supporting mods will.

What head are you running? The earlier ones ran the restrict 3BN head. And having that changed will make a difference. 3MB heads came factory fitted to the later models, but are getting hard to come across these days. Having the restriction removed would cost less than finding a decent 3MB head. Talking £35 to have the head modified.

[jonne123]

This post is deleted!

[jonne123]

does athena silencer fit stock pipe?

[jonne123]

@Calum how is the head supposed to be modified?

[Calum]

There is a combustion ring on the 3bn head. That needs removing.

[Calum]

[jonne123]

Does athena silencer fit stock exhaust?

[declan]

@jonne123 i should imagine it would although i had an old dep on my big one and when i switched to the new dep i had to enlarge the dep pipe to fit the expansion chamber so who knows

[jonne123]

https://www.youtube.com/watch?v=cAQ_cvYRgsg

Has anyone found something that is cheaper than the original exhaust rubber?

[declan]

@jonne123 a bit of car radiator hose

[Calum]

@declan I think I tried that and it didn't work.

Honest to God, the exhaust joining rubbers did my nut in on my DT. Glad I don't have that anymore.

[declan]

@Calum its whats on my bike and many mx guys do it with silicone hoses

[Calum]

@declan Happy days!

[jonne123]

Does athena exhaust fit all dt 125 r/re/x or do they have differences?

[Calum]

RE/X are the same. R is slightly different.

[jonne123]

But with little modificarion they fit?

[Calum]

Yeah, it's the same engine. There are a few mounts that aren't right. And the tail pipe is off every slightly. So needs a joiner.

Not particularly worth it IMO. Unless it doesn't cost you anything to make the parts and/or the part you're buying is dirt cheap.

So to confirm.

• Front mount won't align on the expansion chamber
• Middle Mount on expansion chamber won't align
• Rear Silencer doesn't align