Derestrict yamaha dt 125 r 1997
-
On a copy (of scrims) on another site it said to install an earlier CDI I think? Yamaha certainly had it in in for you lads with later bikes! Access Forbidden!
SNAFU! 
ļø ā¦My bad! It was 404 not quite as verboten!
ā¦ -
@SpookDog scrims sites hosting server has stopped broadcasting the info. But there is a slideshare link on the forum that has the site in slide form
-
@SpookDog 401? That's
UnauthorizedRight, yeah I don't know about that one. I only really researched the one for my bike.
Best thing to do is get a Zeeltronic ignition system for it and you're laughing.
-
@Mr-Shadi Sure, but some models of DTRs were heavily restricted via the CDI, so you're literally gimped until you replace it with either a less restrictive CDI or an aftermarket one.
-
Seen a few 3ncās on eBay lately for reasonable prices. I got one for about Ā£30 a while backā¦
Still not convinced you need one yet. Try and find a copy of scrims write up. I found one the other day, Iāll try and get an addressā¦
-
Seen a few 3ncās on eBay lately for reasonable prices. I got one for about Ā£30 a while backā¦
Still not convinced you need one yet. Try and find a copy of scrims write up. I found one the other day, Iāll try and get an addressā¦
-
@SpookDog i searched a bit and found my bike is actually yamaha dt 125 rn 1997. The rn model is restricted to 80 km/h and there is almost no info about that bike.
-
Thatās not even 60mph! Damn! I did think that you might have one of theāstrangerā ones. I still think that scrims deristricting guide is your best betā¦
@SpookDog i also looked under the speedo and there is a white little box with blue and green red wire coming out of it. i tought it was a light but when i looked it had a little space between 2 metal thingies in it and it was covered with glass. Is that the reed switch?
-
@SpookDog i also looked under the speedo and there is a white little box with blue and green red wire coming out of it. i tought it was a light but when i looked it had a little space between 2 metal thingies in it and it was covered with glass. Is that the reed switch?
-
@SpookDog i also looked under the speedo and there is a white little box with blue and green red wire coming out of it. i tought it was a light but when i looked it had a little space between 2 metal thingies in it and it was covered with glass. Is that the reed switch?
Iām going to say yes. Iāve never seen one myself but itās matching every description Iāve heard
You just have to move it away from the back of the rev counter/speedo clock and isolate it from themā¦Do you have a rev counter and a speedo? Or just the speedo? I always thought that the reed-switch/bulb was behind the rev counter, but I could be wrongā¦.
-
Iām going to say yes. Iāve never seen one myself but itās matching every description Iāve heard
You just have to move it away from the back of the rev counter/speedo clock and isolate it from themā¦Do you have a rev counter and a speedo? Or just the speedo? I always thought that the reed-switch/bulb was behind the rev counter, but I could be wrongā¦.
@SpookDog i have both. i isolated it with electric tape but it still dosent let me go over 80km/h and now the rev limiter can be heard. when i put in 5 gear it wount rev over 6k and same 6 th gear. and sometimes it dosent let me rev over 6k in all the gears but sometimes it does. i dont know what to do.
-
@SpookDog i have both. i isolated it with electric tape but it still dosent let me go over 80km/h and now the rev limiter can be heard. when i put in 5 gear it wount rev over 6k and same 6 th gear. and sometimes it dosent let me rev over 6k in all the gears but sometimes it does. i dont know what to do.
-
@Mr-Shadi i read the scrim derestriction guide but i am ether blind or there is no explanation how to move forward.
Have you moved the bulb as far away as you could from where it was? I thought it was behind the rev counter?
What country are you in? Is the bike native to your country? Iāve never heard of a dt125rn!Try putting it back and seeing if the bike at least āsettles downā!ā¦
At least something is happening, even if itās not what you want! It can (sometimes!) help to diagnose the problems
ā¦ -
Have you moved the bulb as far away as you could from where it was? I thought it was behind the rev counter?
What country are you in? Is the bike native to your country? Iāve never heard of a dt125rn!Try putting it back and seeing if the bike at least āsettles downā!ā¦
At least something is happening, even if itās not what you want! It can (sometimes!) help to diagnose the problems
ā¦@SpookDog i put it away as far as i can but the wire holding rubber is in the way and its near metal if that does anything. the bike is from germany and its in estonia where i am from. i found out that the rn exists trough www.motomike.eu it has parts for that model. and im gonna mess with it again tomorrow cause its 22.29 for me right now and i will go to sleep. Thank you for the help
-
@SpookDog i put it away as far as i can but the wire holding rubber is in the way and its near metal if that does anything. the bike is from germany and its in estonia where i am from. i found out that the rn exists trough www.motomike.eu it has parts for that model. and im gonna mess with it again tomorrow cause its 22.29 for me right now and i will go to sleep. Thank you for the help
-
Have you reconnected the CDI wiring up properly? The reed switch tells the CDI when the bikes doing 60mph then the CDI restricts the revsā¦
Get it all running properly before even trying to de-restrict itā¦
Also disconnecting the speedo cable should work, as the bike wonāt āknowā itās doing 60ā¦
-
Have you reconnected the CDI wiring up properly? The reed switch tells the CDI when the bikes doing 60mph then the CDI restricts the revsā¦
Get it all running properly before even trying to de-restrict itā¦
Also disconnecting the speedo cable should work, as the bike wonāt āknowā itās doing 60ā¦
@SpookDog i have looked over the wiring and its good and the cdi wiring is good, but the reed switch wires were broken at one point and i melted the wires together with a soldering iron.
But im doing a full rebuild in a couple of months then ill know if something is broken and i think i will document it here. -
@SpookDog i have looked over the wiring and its good and the cdi wiring is good, but the reed switch wires were broken at one point and i melted the wires together with a soldering iron.
But im doing a full rebuild in a couple of months then ill know if something is broken and i think i will document it here.@Mr-Shadi i moved the reed switch, cut wires and did a lot of things but when the reed is out of its slot the bike won't rev over 6k in 2nd 3rd 4th 5th and 6th gear, but when the reed is in its slot it only doesn't rev when 80km/h. I even pulled the reed out a little bit and it didnt rev over 6k. Very weird
from motomike when you put in these settings 