Derestrict yamaha dt 125 r 1997
-
@forum members
Isn’t there a later model that needs a CDI wire cutting & earthing somewhere? Or is that a Tzr?…I’m sorry Mr-Shadi, I don’t know too much about later than 1995 model dtr125’s, other than what I have read. What country is your bike from? I’m guessing that english isn’t your first language?
I’ll do a bit of reading and try to find out about 1997 bikes…Edit: 4dl Germany! Got it!
-
@forum members
Isn’t there a later model that needs a CDI wire cutting & earthing somewhere? Or is that a Tzr?…I’m sorry Mr-Shadi, I don’t know too much about later than 1995 model dtr125’s, other than what I have read. What country is your bike from? I’m guessing that english isn’t your first language?
I’ll do a bit of reading and try to find out about 1997 bikes…Edit: 4dl Germany! Got it!
-
The DTRE has a green and black wire, once earthed that's all the electrical restrictions and then the bike revs off the clocks.
-
I’m worried that he might have the one with the ‘silver box behind the 2T oil tank’ that needs loads of faffing about! I tried getting scrims guide up but kept getting a 401 error!…
@SpookDog 401? That's
UnauthorizedRight, yeah I don't know about that one. I only really researched the one for my bike.
Best thing to do is get a Zeeltronic ignition system for it and you're laughing.
Always Originate, Never Pirate!
-
@SpookDog 401? That's
UnauthorizedRight, yeah I don't know about that one. I only really researched the one for my bike.
Best thing to do is get a Zeeltronic ignition system for it and you're laughing.
-
I’m worried that he might have the one with the ‘silver box behind the 2T oil tank’ that needs loads of faffing about! I tried getting scrims guide up but kept getting a 401 error!…
-
On a copy (of scrims) on another site it said to install an earlier CDI I think? Yamaha certainly had it in in for you lads with later bikes! Access Forbidden!
SNAFU! 
️ …My bad! It was 404 not quite as verboten!
… -
@SpookDog scrims sites hosting server has stopped broadcasting the info. But there is a slideshare link on the forum that has the site in slide form
-
@SpookDog 401? That's
UnauthorizedRight, yeah I don't know about that one. I only really researched the one for my bike.
Best thing to do is get a Zeeltronic ignition system for it and you're laughing.
-
@Mr-Shadi Sure, but some models of DTRs were heavily restricted via the CDI, so you're literally gimped until you replace it with either a less restrictive CDI or an aftermarket one.
-
-
Seen a few 3nc’s on eBay lately for reasonable prices. I got one for about £30 a while back…
Still not convinced you need one yet. Try and find a copy of scrims write up. I found one the other day, I’ll try and get an address…
-
@SpookDog i searched a bit and found my bike is actually yamaha dt 125 rn 1997. The rn model is restricted to 80 km/h and there is almost no info about that bike.
-
That’s not even 60mph! Damn! I did think that you might have one of the’stranger’ ones. I still think that scrims deristricting guide is your best bet…
@SpookDog i also looked under the speedo and there is a white little box with blue and green red wire coming out of it. i tought it was a light but when i looked it had a little space between 2 metal thingies in it and it was covered with glass. Is that the reed switch?
-
@SpookDog i also looked under the speedo and there is a white little box with blue and green red wire coming out of it. i tought it was a light but when i looked it had a little space between 2 metal thingies in it and it was covered with glass. Is that the reed switch?
-
@SpookDog i also looked under the speedo and there is a white little box with blue and green red wire coming out of it. i tought it was a light but when i looked it had a little space between 2 metal thingies in it and it was covered with glass. Is that the reed switch?
I’m going to say yes. I’ve never seen one myself but it’s matching every description I’ve heard
You just have to move it away from the back of the rev counter/speedo clock and isolate it from them…Do you have a rev counter and a speedo? Or just the speedo? I always thought that the reed-switch/bulb was behind the rev counter, but I could be wrong….
