Zeeltronic

[andrewj1680]

So I'm fitting my 3xp motor into my dtr zeeltronic doesn't do a cdi to run it so wondering if I will just get away with swapping all the electrics over and buying a later servo model loom as my current setup doesn't have the servo unit

[Calum]

Don't they. What was @Louis-James using?

[andrewj1680]

@Calum I'm guessing he's using the dt setup

[Louis-DT-WR]

@andrewj1680 it's different because my looming, PV servo and stator is the standard Dt125r, but with a wr200 top end and crank. They probably could make one, as mine was the first for my year of Dt125r

[andrewj1680]

The thing is there is a market for the dt unit where as the wr isn't as common so at a guess no benefit to them making a single unit

[Calum]

@andrewj1680 Is there really much gain from a Zeeltronic on the wr, since this was a competition motor.

[andrewj1680]

I don't know to be fair the bike seemed to go well but zeeltronic could possibly take it a step further

[Darty]

@Calum Probably a fair bit, still a very sedate design

@andrewj1680 You could probably get a good enough tune using the DT zeel tho,

The WR could do with a little more ignition advance,

[NINJA]

@andrewj1680 Are they not able to make you a custom map at all???

[andrewj1680]

@Darty I was thinking swap all the electrics for the dt and run a late loom as I can keep the battery too then otherwise it means running the wr200 loom with the power cap

[Darty]

@andrewj1680 Not a bad idea, should work fine