Zeeltronic
-
So I'm fitting my 3xp motor into my dtr zeeltronic doesn't do a cdi to run it so wondering if I will just get away with swapping all the electrics over and buying a later servo model loom as my current setup doesn't have the servo unit
-
@Calum I'm guessing he's using the dt setup
@andrewj1680 it's different because my looming, PV servo and stator is the standard Dt125r, but with a wr200 top end and crank. They probably could make one, as mine was the first for my year of Dt125r
-
The thing is there is a market for the dt unit where as the wr isn't as common so at a guess no benefit to them making a single unit
-
The thing is there is a market for the dt unit where as the wr isn't as common so at a guess no benefit to them making a single unit
-
@andrewj1680 Is there really much gain from a Zeeltronic on the wr, since this was a competition motor.
-
I don't know to be fair the bike seemed to go well but zeeltronic could possibly take it a step further
@andrewj1680 Are they not able to make you a custom map at all???
-
@Calum Probably a fair bit, still a very sedate design
@andrewj1680 You could probably get a good enough tune using the DT zeel tho,
The WR could do with a little more ignition advance,
-
@Darty I was thinking swap all the electrics for the dt and run a late loom as I can keep the battery too then otherwise it means running the wr200 loom with the power cap
@andrewj1680 Not a bad idea, should work fine
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login