DT200WR restoration project pic heavy
-
@Louis-James Such a beautiful job.
We really do have some talented members on here!
I'm in love with this build. The attention to detail is just immense.
wrote on 26 Nov 2018, 18:24 last edited by@Calum thank you Callum. Very much appreciated. You're one to talk with attention to detail
-
wrote on 27 Nov 2018, 22:48 last edited by
Can't stop taking pics, think I love doing this build more than the last one.
Need some more parts from fowlers, chain slide, chain guard, correct mud flap.
Exhaust front pipe needs a few small welds.
Front and rear brakes need tidying up
Side stand switch added,oil pump plumbed up, all wired up.
-
wrote on 29 Nov 2018, 16:11 last edited by
Some new bits came,
Cleaned up the forks and front wheel and indeed the new fork guards.New swing arm chain guard, chain guide and mudflap installed.
Fairings should be back from then bodywork shop next week.
Handguards installed and controls cleaned up.
-
Some new bits came,
Cleaned up the forks and front wheel and indeed the new fork guards.New swing arm chain guard, chain guide and mudflap installed.
Fairings should be back from then bodywork shop next week.
Handguards installed and controls cleaned up.
wrote on 29 Nov 2018, 17:02 last edited by NINJA 12 Mar 2018, 17:35@Louis-James Nice job and boy that kickstand looks MAAAAAAAAAAAHHHHHHHHHHOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOSSSSSSSSSSIIIIIIIIIIIIIIIVVVVVVVVVVVVVEEEEEEEEEEEEEEEEE!!!!!!! :grinning_face_with_smiling_eyes: :smiling_face_with_open_mouth_closed_eyes: :grinning_face_with_smiling_eyes:
-
@Louis-James Nice job and boy that kickstand looks MAAAAAAAAAAAHHHHHHHHHHOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOSSSSSSSSSSIIIIIIIIIIIIIIIVVVVVVVVVVVVVEEEEEEEEEEEEEEEEE!!!!!!! :grinning_face_with_smiling_eyes: :smiling_face_with_open_mouth_closed_eyes: :grinning_face_with_smiling_eyes:
wrote on 29 Nov 2018, 17:50 last edited by@NINJA I know, strange hahaha but better than DT stand I think
-
@NINJA I know, strange hahaha but better than DT stand I think
wrote on 2 Dec 2018, 19:23 last edited by@Louis-James anyone know much about fitting a battery? I just want to do a lights and PV test.. I think you can connect it to the loom r/s of flywheel
-
@Louis-James anyone know much about fitting a battery? I just want to do a lights and PV test.. I think you can connect it to the loom r/s of flywheel
wrote on 3 Dec 2018, 14:10 last edited by@Louis-James does it have the three white wires coming from the stator? You'd need them and a voltage regulator to convert the output from ac to dc.
-
@Louis-James does it have the three white wires coming from the stator? You'd need them and a voltage regulator to convert the output from ac to dc.
wrote on 3 Dec 2018, 18:02 last edited by@DTR-NSR I'll have another look but it has a voltage regulator already
-
@DTR-NSR I'll have another look but it has a voltage regulator already
wrote on 3 Dec 2018, 18:28 last edited bySo hopefully the main part of the project will be done this week.
Got the oil tank all set up nicely.
I had to extend one of the coolant hoses as was way too short.
This fairing bracket I ordered was no longer available so made one myself.
As you can see the fuel tank is in amazing condition for age.. didn't even powdercoat it..
All the colours are colliding and making a nice 90s mess haha just as I wanted.
The fairings are ready to collect from the body shop
-
So hopefully the main part of the project will be done this week.
Got the oil tank all set up nicely.
I had to extend one of the coolant hoses as was way too short.
This fairing bracket I ordered was no longer available so made one myself.As you can see the fuel tank is in amazing condition for age.. didn't even powdercoat it..
All the colours are colliding and making a nice 90s mess haha just as I wanted.
The fairings are ready to collect from the body shop
wrote on 3 Dec 2018, 19:37 last edited by@Louis-James if its got the voltage reg already I should think it will. Probably have 3 white wires going to the vr and one red. The red is the 12v positive output that would go to the battery.
-
wrote on 4 Dec 2018, 16:41 last edited by
We'll here we are.... Fairings and graphics.
-
wrote on 4 Dec 2018, 16:42 last edited by
-
wrote on 4 Dec 2018, 17:24 last edited by
Yes mate, that's look the tits!
-
wrote on 4 Dec 2018, 18:00 last edited by
@Calum cheers Cal. Did you notice the paint has fibre pattern? Just waiting for the indicators before I can put headlight and rear fender on.. then sort the brakes and chain
-
We'll here we are.... Fairings and graphics.
wrote on 4 Dec 2018, 18:55 last edited by@Louis-James She looks lovely dude, where did you get the heat shield stuff from???
-
wrote on 4 Dec 2018, 19:21 last edited by
@NINJA thanks:) you can get it in eBay, I got 6 fairly large sheets for £12
-
wrote on 4 Dec 2018, 19:52 last edited by
Yeah that's looking mega mate!
-
@NINJA thanks:) you can get it in eBay, I got 6 fairly large sheets for £12
wrote on 4 Dec 2018, 20:01 last edited by@Louis-James Do you have a link please bud???
-
wrote on 4 Dec 2018, 20:07 last edited by
@NINJA can't fit the exact listing but this is similar
https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F130796418818 -
@NINJA can't fit the exact listing but this is similar
https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F130796418818wrote on 4 Dec 2018, 20:11 last edited by NINJA 12 Apr 2018, 20:13@Louis-James OK Thanks, I ordered some from that dude before for my DTR, but the sheets were a bit on the small side. Good quality heat shield tho - nice and thick, I'll need some for my MX 125.