300cc Enduro?
-
If money was no object which 300cc Enduro bike would you buy???
I'd probably go for this bad boy;
-
Husqvarna TE300i without a doubt, but too heavy and too much power where I ride, so would go for a 250.
@Minia It would be a very tough choice between the fuel injected KTM's/Huskys and a carbureted bike? I like it that the TM bikes are hand made and also offer something a bit different to the mainstream bikes out there. Plus you could also put a Lectron carb on it for further improvements in power, handling and rideability. Those TPI models are hard to beat though. :grinning_face_with_smiling_eyes: :grinning_face_with_smiling_eyes: :grinning_face_with_smiling_eyes:
SEDUCED BY THE DARK SIDE!!!
-
@Minia It would be a very tough choice between the fuel injected KTM's/Huskys and a carbureted bike? I like it that the TM bikes are hand made and also offer something a bit different to the mainstream bikes out there. Plus you could also put a Lectron carb on it for further improvements in power, handling and rideability. Those TPI models are hard to beat though. :grinning_face_with_smiling_eyes: :grinning_face_with_smiling_eyes: :grinning_face_with_smiling_eyes:
@NINJA Aye. Got my eyes on a wr250 though. One popped up closeby for a good price and would be a great base for a project. Im in France by the end of the week so... just maybe. But GasGas will have to go, no room for 2 offroaders.
Yamaha DT125R Blue 2002, XT 125 1982, Yamaha WR250Z 1992, BMW GS650F 1994, Benelli BN302 2015
-
@NINJA Aye. Got my eyes on a wr250 though. One popped up closeby for a good price and would be a great base for a project. Im in France by the end of the week so... just maybe. But GasGas will have to go, no room for 2 offroaders.
-
@Minia can you still get gas gas spares?
@Nottsbiker Not for old bikes, GasGas sold their factory and spare parts in the mid 2000s. I think around 2005-06 or so, so finding parts for older bikes is a pain. The EC is ok, because it was a popular bike. But other models like my Pampera, no hope really unless you come across someone breaking the bike or who somehow has original parts from GasGas.
-
@Nottsbiker Not for old bikes, GasGas sold their factory and spare parts in the mid 2000s. I think around 2005-06 or so, so finding parts for older bikes is a pain. The EC is ok, because it was a popular bike. But other models like my Pampera, no hope really unless you come across someone breaking the bike or who somehow has original parts from GasGas.
-
@Minia TE250i review
@NINJA There's some irony in that video. "It runs great, most people don't tune their 2-strokes" and 2 minutes later "This bike runs as good as any 2-stroke I've ever seen." "Low-end torque is not great, possibly because it runs a little lean." Eh? Wording is a little poor in that review.
-
Goes to France to work on the house, buys a bike instead
Well, I found the one I was looking at earlier and got my hands on it. What a machine!
Yamaha DT125R Blue 2002, XT 125 1982, Yamaha WR250Z 1992, BMW GS650F 1994, Benelli BN302 2015
-
Goes to France to work on the house, buys a bike instead
Well, I found the one I was looking at earlier and got my hands on it. What a machine!
-
Goes to France to work on the house, buys a bike instead
Well, I found the one I was looking at earlier and got my hands on it. What a machine!
@Minia glad to hear that you're sorted
-
Goes to France to work on the house, buys a bike instead
Well, I found the one I was looking at earlier and got my hands on it. What a machine!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login