Skip to content
  • Recent
  • Tags
  • Popular
  • Users
  • Groups
Skins
  • Light
  • Cerulean
  • Cosmo
  • Flatly
  • Journal
  • Litera
  • Lumen
  • Lux
  • Materia
  • Minty
  • Morph
  • Pulse
  • Sandstone
  • Simplex
  • Sketchy
  • Spacelab
  • United
  • Yeti
  • Zephyr
  • Dark
  • Cyborg
  • Darkly
  • Quartz
  • Slate
  • Solar
  • Superhero
  • Vapor

  • Default (Slate)
  • No Skin
Collapse
Brand Logo

DT125R FORUM

  1. Home
  2. Owners Build Threads
  3. DTR
  4. Stevie’s French '98, Mid-90's WR/YZ/DT (An idiotproof guide to building your own DTR)

Stevie’s French '98, Mid-90's WR/YZ/DT (An idiotproof guide to building your own DTR)

Scheduled Pinned Locked Moved DTR
211 Posts 11 Posters 41.4k Views
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • C Calum
    8 Oct 2020, 09:46

    So the plans I uploaded are good for a template, the part that slots into the DTR frame stays the same. The upper half you just measure the outer diameter of the race that fits your forks.

    The rest isn't really that all relevant. But you still need someone with a lathe to fabricate it for you.

    Personally, I would stick with the 4FU barrel. The 3MB00P barrel feels like it's lost power. The shift of the exhaust port doesn't work very well. The extra "performance" gained in the higher revs has just resulted in loss of performance low down.

    I would use the 4FU barrel and have that ported.

    S Offline
    S Offline
    Stevie Wonder
    wrote on 8 Oct 2020, 13:58 last edited by
    #44

    @Calum said in Stevie’s French '98, Mid-90's WR/YZ/DT (An idiotproof guide to building your own DTR):

    So the plans I uploaded are good for a template, the part that slots into the DTR frame stays the same. The upper half you just measure the outer diameter of the race that fits your forks.

    Wicked, thanks a lot for helping me get it sorted Cal and also for bearing with me when I didn’t quite get it. If what I found out last night is true ‘01 426 forks are the same as ‘02 yz.

    https://www.ebay.co.uk/itm/293695067645

    I mean it makes sense, looks the same and there parts are always coming up in searches and even the fork seals I bought where 96-03 yz250.
    I’m gonna see if I can cross reference it through Fowler’s and then go from there. Once I know that we’re laughing 😉

    luckily we have an engineers shop and a couple friends with lathes although given the fact I don’t want to rely on anyone I’ll probably just head to the local engineers shop. Just out of curiosity too what’d pay to make it (even if that’s just cost of materials)

    taking from what you said there I must agree. Upon reflection i don’t think my bike ever really like the dep pipe as much as the standard unrestricted pipe but that could just be me. IMO it felt like it lacked the mid range to be able to really pull hard as high into higher rpms. I don’t know though, it’s all just theory’s and spitball ideas. and was just generally a bit quicker.

    one advantage to a ported 4FU is I can make it 150cc and have it ported to 150cc and I only ever have to worry about replate it and the spec will always be the same unlike if I had to rebore everytime which would fuck up the port timings

    S 1 Reply Last reply 8 Oct 2020, 16:06
    0
    • S Stevie Wonder
      8 Oct 2020, 13:58

      @Calum said in Stevie’s French '98, Mid-90's WR/YZ/DT (An idiotproof guide to building your own DTR):

      So the plans I uploaded are good for a template, the part that slots into the DTR frame stays the same. The upper half you just measure the outer diameter of the race that fits your forks.

      Wicked, thanks a lot for helping me get it sorted Cal and also for bearing with me when I didn’t quite get it. If what I found out last night is true ‘01 426 forks are the same as ‘02 yz.

      https://www.ebay.co.uk/itm/293695067645

      I mean it makes sense, looks the same and there parts are always coming up in searches and even the fork seals I bought where 96-03 yz250.
      I’m gonna see if I can cross reference it through Fowler’s and then go from there. Once I know that we’re laughing 😉

      luckily we have an engineers shop and a couple friends with lathes although given the fact I don’t want to rely on anyone I’ll probably just head to the local engineers shop. Just out of curiosity too what’d pay to make it (even if that’s just cost of materials)

      taking from what you said there I must agree. Upon reflection i don’t think my bike ever really like the dep pipe as much as the standard unrestricted pipe but that could just be me. IMO it felt like it lacked the mid range to be able to really pull hard as high into higher rpms. I don’t know though, it’s all just theory’s and spitball ideas. and was just generally a bit quicker.

      one advantage to a ported 4FU is I can make it 150cc and have it ported to 150cc and I only ever have to worry about replate it and the spec will always be the same unlike if I had to rebore everytime which would fuck up the port timings

      S Offline
      S Offline
      SpookDog
      wrote on 8 Oct 2020, 16:06 last edited by SpookDog 10 Aug 2020, 17:11
      #45

      @Stevie-Wonder

      The YZ headstock is longer than the DTR125 one, no?..
      The YZ125 headstock/clamps I have are threaded lower down. So all I have to do is tighten down the bearing with the ‘ring nut’ to the right spec, then put a spacer on (about 3/4 inch maybe), then put the top fork clamp plate on and tighten the dome nut on top to clamp it in place...
      I’ll have to measure the dome nut thread size, see if the ‘bearing ring’ are the same size or different. I think the previous owner threaded into the wider tube lower down. It seems to work...

      S 1 Reply Last reply 8 Oct 2020, 21:29
      0
      • S SpookDog
        8 Oct 2020, 16:06

        @Stevie-Wonder

        The YZ headstock is longer than the DTR125 one, no?..
        The YZ125 headstock/clamps I have are threaded lower down. So all I have to do is tighten down the bearing with the ‘ring nut’ to the right spec, then put a spacer on (about 3/4 inch maybe), then put the top fork clamp plate on and tighten the dome nut on top to clamp it in place...
        I’ll have to measure the dome nut thread size, see if the ‘bearing ring’ are the same size or different. I think the previous owner threaded into the wider tube lower down. It seems to work...

        S Offline
        S Offline
        Stevie Wonder
        wrote on 8 Oct 2020, 21:29 last edited by
        #46

        HOOOMOTHERFUCKINGRAYYY

        I’ve cracked uploading photos on here on my iPhone!

        Must say feels bloody good to bring this into the 21st century and it not just be walls of text now
        Here’s a couple pics to celebrate 🎉

        alt text
        Found this cool mural after an afternoon in the woods. Couldn’t pass up grabbing a photo.

        alt text
        One of the local slices of bliss I have the ability of being able to ride to with a motorbike.

        Only issue is now I’ve got about a year and half worth/500+ photos to sort through all of which are completely out of order. I’m sure one night with some beers I’ll get it done. 😂
        At least with everything sorted now posts become a lot easier for me, I don’t have to type as much because I can use photos and everything from here on in will come out chronologically as it happens.

        1 Reply Last reply
        0
        • C Offline
          C Offline
          Calum
          wrote on 8 Oct 2020, 22:01 last edited by
          #47

          Bike looks clean bud!

          My advice, don't modify it! That little gem will go up in value nicely.

          Always Originate, Never Pirate!

          D S 2 Replies Last reply 9 Oct 2020, 09:47
          0
          • C Calum
            8 Oct 2020, 22:01

            Bike looks clean bud!

            My advice, don't modify it! That little gem will go up in value nicely.

            D Offline
            D Offline
            declan
            wrote on 9 Oct 2020, 09:47 last edited by
            #48

            @Calum yeah would be a shame for sure

            1 Reply Last reply
            0
            • C Calum
              8 Oct 2020, 22:01

              Bike looks clean bud!

              My advice, don't modify it! That little gem will go up in value nicely.

              S Offline
              S Offline
              Stevie Wonder
              wrote on 9 Oct 2020, 14:57 last edited by Stevie Wonder 10 Sept 2020, 17:03
              #49

              @Calum said in Stevie’s French '98, Mid-90's WR/YZ/DT (An idiotproof guide to building your own DTR):

              Bike looks clean bud!

              My advice, don't modify it! That little gem will go up in value nicely.

              Well now you tell me!! Well it’s a bit bloody for that now don’t you think 😉😂

              Thank you for the compliments by the way, always appreciated.
              Believe it or not I actually picked one of the rougher bikes unit 5 had when I ventured there. Even better I almost had a completely different bike. I almost walked out of their with a KDX125sr if I’m honest with you, a much better bike in every way but not a “1998 Yamaha DT125R” like I’d dreamt of owning and searched ages for (that and the ‘KDX was an extra £200-300. Yes I know how rare the SR is too and my chances of buying another especially that clean and original are practically 0).
              But as the story goes it weren’t a DT made the same year I was so I wasn’t happy. I had to find one.
              I can’t even lie it was a bit obsessive I’d been searching high and low in every corner of the world, then one magical day one pops up for sale on EBay...
              “Yamaha DT125R 1998” - Romford 50 miles away.
              alt text
              alt text
              I bloody shit myself. Worst thing was I don’t remember having the money available to me right away and having to spend a week watching it on eBay praying it didn’t sell because I couldn’t do anything yet (I didn’t get a lot of sleep that week 😂)
              Luckily though all went well and here we are!
              I think the thing that annoyed me the most though was the fact after nearly year and a half continuously looking me and my mum pull up to unit 5 only to find an identical 1998 registered bike parked next to mine not yet listed.
              Fucking typical.
              alt text
              I had to mute the sound so you don’t have to listen to my mum try charm Tony or my mouth dragging along the floor like a kid in a two stroke sweet shop. 😂

              alt text
              alt text
              alt text
              This was right after my first ride, I honestly couldn’t believe how smooth, comfortable and quiet she was. I remember a couple times trying to put her into powerband but getting scared because I hadn’t bought the bike yet, the yard was small and the engine cold.
              alt text
              Right next to mine stands an all original DTX. Wish I took a bit more interest in it now because it’s only now I realise how rare these models become.
              She was grubby girl compared to everything that was on display at Unit 5 at the time
              alt text
              But I’m honest with you seeing her grubbiness only made me feel more like I’d found a diamond in the rough and haggle the price even harder.
              I just remember seeing her looking all filthy and thinking “it’s my turn to take you home and love you now” 😂

              alt text
              Notice here Tony holds the bike whilst my mum used a bit of female charm. I remember backing the bike out and shitting myself like it was yesterday. Sidenote too: one of my favourite photos of my bike. There’s just so much signature 90’s OEM crosser style in there. The old Dunlop D952’s, graphics/colourway and the stance of the bike just make it for me
              Can you tell that I’m going to get a set of Kenda K270’s and probably gonna end up just replicating that like this?
              alt text

              After I bought her it was just a long 3 month wait for the DVLA to do their bit.
              During this time I just spent time getting to know the bike, looking back it’s crazy to think how foreign felt to me and how it blew the head of anything I’d ever rode before. Aside from no real previous experience it also blew my head off because everything was bone stock OEM.
              It could do little power wheelies pulling away in first and still sound as tame as your nans Yaris. Even better because of DVLA the only way I could ride it is by having little blast around my neighbourhood or very illegally through some trails so everything about it just felt fun, fast and naughty.
              alt text
              I took her to a track once too but I did about 5 laps without knobblies and decided that wasn’t how I wanted to break myself or my bike before it’s even registered
              alt text
              alt text

              To be honest with you though Cal, I’m not really bothered by the value of her, I mean it’s nice that’s she worth a bit but ultimately useless to me because I could never sell her. It’s
              I’m the only registered keeper and she just means to much to me.
              Plus you just can’t put a price on the smiles the bike gives everyday. Wether that be popping down some local country roads, doing the occasional wheelie for the local yoofs, brapping your bike for a dads little boy or making some older guys day by stopping to listen to his two stroke glory days, letting him ask questions and appreciating eachothers history we just shared.

              Now whilst money and the bike mean nothing to me condition on the other hand matters a lot.
              I want the bike looking better then I did when I first restored it.

              alt text
              Here’s what she looked like right after she turned legal and I was happy restoring her to a decent condition. (It was her first outing to Gt Bentley bike night. It was a special night because my mate got his ‘88 KMX out especially for it just so the DTR and KMX could park side by side eachother. To my surprise even amongst £20,000 custom choppers they still pulled a little crowd.)

              Now it is to my understanding you can’t keep everything perfect forever (especially when you ride it and use it like it was intended for) but it won’t stop me doing everything in my power to try. Oddly enough preservation was actually one of the earliest and biggest driving factors for modifying her, my thought being that wear and tear is inevitable but I can’t break what isn’t on the bike.
              Essentially modify the bike, put 100% the original bits etc in the loft, forget about it so that in 5? 10? 30?/however many years time I can just pull them out and reconfigure her back to OEM settings.
              Boom, all the parts are original to my bike specifically and everything just how it was when I first got her.
              It also means that any mod that I think wasn’t worth it/I didn’t like can be undone eassyyyy.

              I must admit feel a bit guilty seeing how battered a lot of other people’s bikes began their lives like before turning into the builds they are now.
              It does feel almost criminal knowing how clean it is and then ripping it a part anyway.

              It’s funny actually. One of the earliest things I ever remember from this forum was callum saying that after everything he’d done to his own bike the stock form was the most fun.
              Now only a year and half into my ownership when I’ve not even done a lot to my bike and I already feel that sentiment heavily.
              As mentioned in my last post, it dawned on me I spent more time fiddling with my bike then I have enjoying it.
              Fairplay I’ve had 6k worth of enjoyment out of it but most of that the bike wasn’t working 100% due an improperly set up powervalve or has been on some knobbies that are way too big for the bike.

              C 1 Reply Last reply 9 Oct 2020, 17:42
              0
              • S Stevie Wonder
                9 Oct 2020, 14:57

                @Calum said in Stevie’s French '98, Mid-90's WR/YZ/DT (An idiotproof guide to building your own DTR):

                Bike looks clean bud!

                My advice, don't modify it! That little gem will go up in value nicely.

                Well now you tell me!! Well it’s a bit bloody for that now don’t you think 😉😂

                Thank you for the compliments by the way, always appreciated.
                Believe it or not I actually picked one of the rougher bikes unit 5 had when I ventured there. Even better I almost had a completely different bike. I almost walked out of their with a KDX125sr if I’m honest with you, a much better bike in every way but not a “1998 Yamaha DT125R” like I’d dreamt of owning and searched ages for (that and the ‘KDX was an extra £200-300. Yes I know how rare the SR is too and my chances of buying another especially that clean and original are practically 0).
                But as the story goes it weren’t a DT made the same year I was so I wasn’t happy. I had to find one.
                I can’t even lie it was a bit obsessive I’d been searching high and low in every corner of the world, then one magical day one pops up for sale on EBay...
                “Yamaha DT125R 1998” - Romford 50 miles away.
                alt text
                alt text
                I bloody shit myself. Worst thing was I don’t remember having the money available to me right away and having to spend a week watching it on eBay praying it didn’t sell because I couldn’t do anything yet (I didn’t get a lot of sleep that week 😂)
                Luckily though all went well and here we are!
                I think the thing that annoyed me the most though was the fact after nearly year and a half continuously looking me and my mum pull up to unit 5 only to find an identical 1998 registered bike parked next to mine not yet listed.
                Fucking typical.
                alt text
                I had to mute the sound so you don’t have to listen to my mum try charm Tony or my mouth dragging along the floor like a kid in a two stroke sweet shop. 😂

                alt text
                alt text
                alt text
                This was right after my first ride, I honestly couldn’t believe how smooth, comfortable and quiet she was. I remember a couple times trying to put her into powerband but getting scared because I hadn’t bought the bike yet, the yard was small and the engine cold.
                alt text
                Right next to mine stands an all original DTX. Wish I took a bit more interest in it now because it’s only now I realise how rare these models become.
                She was grubby girl compared to everything that was on display at Unit 5 at the time
                alt text
                But I’m honest with you seeing her grubbiness only made me feel more like I’d found a diamond in the rough and haggle the price even harder.
                I just remember seeing her looking all filthy and thinking “it’s my turn to take you home and love you now” 😂

                alt text
                Notice here Tony holds the bike whilst my mum used a bit of female charm. I remember backing the bike out and shitting myself like it was yesterday. Sidenote too: one of my favourite photos of my bike. There’s just so much signature 90’s OEM crosser style in there. The old Dunlop D952’s, graphics/colourway and the stance of the bike just make it for me
                Can you tell that I’m going to get a set of Kenda K270’s and probably gonna end up just replicating that like this?
                alt text

                After I bought her it was just a long 3 month wait for the DVLA to do their bit.
                During this time I just spent time getting to know the bike, looking back it’s crazy to think how foreign felt to me and how it blew the head of anything I’d ever rode before. Aside from no real previous experience it also blew my head off because everything was bone stock OEM.
                It could do little power wheelies pulling away in first and still sound as tame as your nans Yaris. Even better because of DVLA the only way I could ride it is by having little blast around my neighbourhood or very illegally through some trails so everything about it just felt fun, fast and naughty.
                alt text
                I took her to a track once too but I did about 5 laps without knobblies and decided that wasn’t how I wanted to break myself or my bike before it’s even registered
                alt text
                alt text

                To be honest with you though Cal, I’m not really bothered by the value of her, I mean it’s nice that’s she worth a bit but ultimately useless to me because I could never sell her. It’s
                I’m the only registered keeper and she just means to much to me.
                Plus you just can’t put a price on the smiles the bike gives everyday. Wether that be popping down some local country roads, doing the occasional wheelie for the local yoofs, brapping your bike for a dads little boy or making some older guys day by stopping to listen to his two stroke glory days, letting him ask questions and appreciating eachothers history we just shared.

                Now whilst money and the bike mean nothing to me condition on the other hand matters a lot.
                I want the bike looking better then I did when I first restored it.

                alt text
                Here’s what she looked like right after she turned legal and I was happy restoring her to a decent condition. (It was her first outing to Gt Bentley bike night. It was a special night because my mate got his ‘88 KMX out especially for it just so the DTR and KMX could park side by side eachother. To my surprise even amongst £20,000 custom choppers they still pulled a little crowd.)

                Now it is to my understanding you can’t keep everything perfect forever (especially when you ride it and use it like it was intended for) but it won’t stop me doing everything in my power to try. Oddly enough preservation was actually one of the earliest and biggest driving factors for modifying her, my thought being that wear and tear is inevitable but I can’t break what isn’t on the bike.
                Essentially modify the bike, put 100% the original bits etc in the loft, forget about it so that in 5? 10? 30?/however many years time I can just pull them out and reconfigure her back to OEM settings.
                Boom, all the parts are original to my bike specifically and everything just how it was when I first got her.
                It also means that any mod that I think wasn’t worth it/I didn’t like can be undone eassyyyy.

                I must admit feel a bit guilty seeing how battered a lot of other people’s bikes began their lives like before turning into the builds they are now.
                It does feel almost criminal knowing how clean it is and then ripping it a part anyway.

                It’s funny actually. One of the earliest things I ever remember from this forum was callum saying that after everything he’d done to his own bike the stock form was the most fun.
                Now only a year and half into my ownership when I’ve not even done a lot to my bike and I already feel that sentiment heavily.
                As mentioned in my last post, it dawned on me I spent more time fiddling with my bike then I have enjoying it.
                Fairplay I’ve had 6k worth of enjoyment out of it but most of that the bike wasn’t working 100% due an improperly set up powervalve or has been on some knobbies that are way too big for the bike.

                C Offline
                C Offline
                Calum
                wrote on 9 Oct 2020, 17:42 last edited by
                #50

                @Stevie-Wonder That sounds grand. I love my SM setup, but trust me, the bike is most fun in stock trim. 100% believe that. Want a fast bike, do your test, want a bike that puts smiles on your face.... Well you found it!

                My bike got stolen and smashed to pieces and I was sick of the sight of it, hence why it went and got modified. But if the bike never got stolen then I would have left it stock.

                Part of the my enjoyment back then came from the rebuild. But I have long since grown tired of that and the headaches!

                Always Originate, Never Pirate!

                S H 2 Replies Last reply 14 Oct 2020, 13:04
                3
                • C Calum
                  9 Oct 2020, 17:42

                  @Stevie-Wonder That sounds grand. I love my SM setup, but trust me, the bike is most fun in stock trim. 100% believe that. Want a fast bike, do your test, want a bike that puts smiles on your face.... Well you found it!

                  My bike got stolen and smashed to pieces and I was sick of the sight of it, hence why it went and got modified. But if the bike never got stolen then I would have left it stock.

                  Part of the my enjoyment back then came from the rebuild. But I have long since grown tired of that and the headaches!

                  S Offline
                  S Offline
                  SpookDog
                  wrote on 14 Oct 2020, 13:04 last edited by SpookDog
                  #51

                  My head stock

                  alt text

                  Is this a Dtr one pressed in?...

                  S 1 Reply Last reply 14 Oct 2020, 13:46
                  0
                  • S SpookDog
                    14 Oct 2020, 13:04

                    My head stock

                    alt text

                    Is this a Dtr one pressed in?...

                    S Offline
                    S Offline
                    Stevie Wonder
                    wrote on 14 Oct 2020, 13:46 last edited by Stevie Wonder
                    #52

                    @SpookDog
                    What forks are those? And let me post a couple pics for comparison

                    alt text
                    Here’s the DTR’s stem at the front. A lil stubby chode

                    Then YZ one at the back

                    I just had a quick glance at both pictures for comparison and yes it does look like the DTR stem. I don’t suppose those are Sinnis apache forks?

                    https://dt125r.co.uk/topic/2325/yz-usd-front-end-fork-swap/17

                    It took a lot of explaining for me to get it why you can’t just press the stems like I originally hoped and precisely why a USD swap is taking over 3 months.

                    Update

                    I toy’d with the idea of enjoying the originality of my bike and just getting some 200R forks and selling the USD’s to make some cash but I gave up in the end after having to deal with facebook buyers and realising the 200 forks sold.
                    (I find out those progressive springs will drop right into the 200R forks by the way)

                    Wasn’t particularly gutted, I was just chancing the idea as it was anyway.
                    Although, I had thought of a really really cool build idea that a now couldn’t do without those forks. The idea included having yellow gaiters. Not sure if it really was an idea or an excuse for me to buy yellow for gaiters for the bike to wear...
                    I guess we’ll never know 😂

                    Luckily though whilst searching for parts I stumbled some well ridden survivor WR200’s and some 89-90 YZ’s that give me inspiration.
                    I also started to look into custom YZ builds from 98-02 just to see what else everyone was doing with their bikes around that time and what kind of things you could customise

                    S 1 Reply Last reply 14 Oct 2020, 13:56
                    0
                    • S Stevie Wonder
                      14 Oct 2020, 13:46

                      @SpookDog
                      What forks are those? And let me post a couple pics for comparison

                      alt text
                      Here’s the DTR’s stem at the front. A lil stubby chode

                      Then YZ one at the back

                      I just had a quick glance at both pictures for comparison and yes it does look like the DTR stem. I don’t suppose those are Sinnis apache forks?

                      https://dt125r.co.uk/topic/2325/yz-usd-front-end-fork-swap/17

                      It took a lot of explaining for me to get it why you can’t just press the stems like I originally hoped and precisely why a USD swap is taking over 3 months.

                      Update

                      I toy’d with the idea of enjoying the originality of my bike and just getting some 200R forks and selling the USD’s to make some cash but I gave up in the end after having to deal with facebook buyers and realising the 200 forks sold.
                      (I find out those progressive springs will drop right into the 200R forks by the way)

                      Wasn’t particularly gutted, I was just chancing the idea as it was anyway.
                      Although, I had thought of a really really cool build idea that a now couldn’t do without those forks. The idea included having yellow gaiters. Not sure if it really was an idea or an excuse for me to buy yellow for gaiters for the bike to wear...
                      I guess we’ll never know 😂

                      Luckily though whilst searching for parts I stumbled some well ridden survivor WR200’s and some 89-90 YZ’s that give me inspiration.
                      I also started to look into custom YZ builds from 98-02 just to see what else everyone was doing with their bikes around that time and what kind of things you could customise

                      S Offline
                      S Offline
                      SpookDog
                      wrote on 14 Oct 2020, 13:56 last edited by
                      #53

                      @Stevie-Wonder
                      I believe they are Yz 125 USD, they were previously fitted to a Dtr. I got them with the ally swing arm, both callipers, spindles and spacers, ect. £150
                      Oh yeah! And ally wheels...

                      If I was you I’d ask at a local engineer about getting the Dtr headstock pressed in. It’s how they’re manufactured. Nothing to be scared of!

                      C 1 Reply Last reply 14 Oct 2020, 14:04
                      0
                      • S SpookDog
                        14 Oct 2020, 13:56

                        @Stevie-Wonder
                        I believe they are Yz 125 USD, they were previously fitted to a Dtr. I got them with the ally swing arm, both callipers, spindles and spacers, ect. £150
                        Oh yeah! And ally wheels...

                        If I was you I’d ask at a local engineer about getting the Dtr headstock pressed in. It’s how they’re manufactured. Nothing to be scared of!

                        C Offline
                        C Offline
                        Calum
                        wrote on 14 Oct 2020, 14:04 last edited by
                        #54

                        @SpookDog It's not always as straight forward as that. Normally the stem needs a collar made up else it won't fit into the USD stem.

                        If you need to get something fabricated then why not just make th bearing cup?

                        Always Originate, Never Pirate!

                        S 1 Reply Last reply 14 Oct 2020, 14:08
                        0
                        • C Calum
                          14 Oct 2020, 14:04

                          @SpookDog It's not always as straight forward as that. Normally the stem needs a collar made up else it won't fit into the USD stem.

                          If you need to get something fabricated then why not just make th bearing cup?

                          S Offline
                          S Offline
                          Stevie Wonder
                          wrote on 14 Oct 2020, 14:08 last edited by
                          #55

                          @Calum said in Stevie’s French '98, Mid-90's WR/YZ/DT (An idiotproof guide to building your own DTR):

                          @SpookDog It's not always as straight forward as that. Normally the stem needs a collar made up else it won't fit into the USD stem.

                          If you need to get something fabricated then why not just make th bearing cup?

                          link text

                          Read through my ramblings and everyone else educating me, you’ll understand why that just isn’t an option.

                          Also they’re mystery forks, I thought they might be 89 yz USD’s thinking from memory they didn’t taper the upper fork leg inbetween yolks but a quick check says they where and from what I’ve seen the majority of YZ’s and USD’s in general have this. It’s why despite what anyone says 99% you can’t just press the DT stem into different yolks

                          C 1 Reply Last reply 14 Oct 2020, 14:54
                          0
                          • S Stevie Wonder
                            14 Oct 2020, 14:08

                            @Calum said in Stevie’s French '98, Mid-90's WR/YZ/DT (An idiotproof guide to building your own DTR):

                            @SpookDog It's not always as straight forward as that. Normally the stem needs a collar made up else it won't fit into the USD stem.

                            If you need to get something fabricated then why not just make th bearing cup?

                            link text

                            Read through my ramblings and everyone else educating me, you’ll understand why that just isn’t an option.

                            Also they’re mystery forks, I thought they might be 89 yz USD’s thinking from memory they didn’t taper the upper fork leg inbetween yolks but a quick check says they where and from what I’ve seen the majority of YZ’s and USD’s in general have this. It’s why despite what anyone says 99% you can’t just press the DT stem into different yolks

                            C Offline
                            C Offline
                            Calum
                            wrote on 14 Oct 2020, 14:54 last edited by
                            #56

                            @Stevie-Wonder You can use the DTR stem, you just make a collar if the taper is not big enough, or machine down the stem if it's too fat, although I suspect the former.

                            Again, anything is possible, but bearing cup is just simple.

                            Always Originate, Never Pirate!

                            S 2 Replies Last reply 14 Oct 2020, 17:03
                            0
                            • C Calum
                              14 Oct 2020, 14:54

                              @Stevie-Wonder You can use the DTR stem, you just make a collar if the taper is not big enough, or machine down the stem if it's too fat, although I suspect the former.

                              Again, anything is possible, but bearing cup is just simple.

                              S Offline
                              S Offline
                              SpookDog
                              wrote on 14 Oct 2020, 17:03 last edited by SpookDog
                              #57

                              @Calum
                              Yeah. There is a small thin collar that widens the top of the stem to fit snug into the Yz top yoke. Or do you mean the stem/stock presses into the bottom yoke?...
                              I does get what stevie means, if you don’t know the model/year/ext, it throws things off. I first thought that mine was a Yz stock that someone cut and lathed/threaded down. Without talking to the previous, previous owner it’s just a mystery. I’ll see if I can connect with them...

                              1 Reply Last reply
                              1
                              • C Calum
                                14 Oct 2020, 14:54

                                @Stevie-Wonder You can use the DTR stem, you just make a collar if the taper is not big enough, or machine down the stem if it's too fat, although I suspect the former.

                                Again, anything is possible, but bearing cup is just simple.

                                S Offline
                                S Offline
                                SpookDog
                                wrote on 14 Oct 2020, 19:23 last edited by SpookDog
                                #58

                                @Calum

                                Sorry, I think I’ve confused things. Getting the vernacular right is half the battle sometimes!...

                                Top yoke
                                Head-stock/stem
                                Bottom yoke

                                @Stevie-Wonder

                                I will try to read the whole tread when I have a spare hour or so and am not too wasted! 😎

                                Check out this pic
                                alt text

                                Mine has ‘tapered’ forks as well...
                                The bottom yoke has been raised an inch (you can see the ‘shadow’ line) but still has plenty of meat to grip. The only thing that’s been done is a Dtr headstock stem pressed in. If you’re really worried you can reprofile the bottom yoke clamp inners to match the fork profile...
                                Hope this helps...

                                If anything, if you want to maintain the distance between tapers, the bearing cup would be the best option...

                                I will read the whole thread though!! 😎

                                P.S. Calum, are you using ball bearing races or taper bearings on top? Taper bearings would just need a spacer, no? Not a cup? Or am I confusing things again! 🤪

                                C 1 Reply Last reply 14 Oct 2020, 22:26
                                0
                                • S SpookDog
                                  14 Oct 2020, 19:23

                                  @Calum

                                  Sorry, I think I’ve confused things. Getting the vernacular right is half the battle sometimes!...

                                  Top yoke
                                  Head-stock/stem
                                  Bottom yoke

                                  @Stevie-Wonder

                                  I will try to read the whole tread when I have a spare hour or so and am not too wasted! 😎

                                  Check out this pic
                                  alt text

                                  Mine has ‘tapered’ forks as well...
                                  The bottom yoke has been raised an inch (you can see the ‘shadow’ line) but still has plenty of meat to grip. The only thing that’s been done is a Dtr headstock stem pressed in. If you’re really worried you can reprofile the bottom yoke clamp inners to match the fork profile...
                                  Hope this helps...

                                  If anything, if you want to maintain the distance between tapers, the bearing cup would be the best option...

                                  I will read the whole thread though!! 😎

                                  P.S. Calum, are you using ball bearing races or taper bearings on top? Taper bearings would just need a spacer, no? Not a cup? Or am I confusing things again! 🤪

                                  C Offline
                                  C Offline
                                  Calum
                                  wrote on 14 Oct 2020, 22:26 last edited by
                                  #59

                                  @SpookDog Taper bearing. No it needed the cup. The overall height of the forks are a good few cm taller.

                                  Always Originate, Never Pirate!

                                  S 1 Reply Last reply 15 Oct 2020, 19:32
                                  0
                                  • C Calum
                                    14 Oct 2020, 22:26

                                    @SpookDog Taper bearing. No it needed the cup. The overall height of the forks are a good few cm taller.

                                    S Offline
                                    S Offline
                                    Stevie Wonder
                                    wrote on 15 Oct 2020, 19:32 last edited by
                                    #60

                                    @Calum said in Stevie’s French '98, Mid-90's WR/YZ/DT (An idiotproof guide to building your own DTR):

                                    @SpookDog Taper bearing. No it needed the cup. The overall height of the forks are a good few cm taller.

                                    Taper bearingsss. Unsealed bearings just make me uncomfortable tbh.
                                    If spookdog chucks those photos on my old USD post it’ll make Callum’s explanation a lot easier to understand as quite a few people still seem to believe that straight swapping the stems is a visible option.
                                    Perfect for someone like me who hadn’t the foggiest.

                                    In other news...
                                    A while back I stumbled across these. I was on eBay and trying to find a WR200 calliper guard (3JD-2749-100) when I come across these little gems.

                                    link text
                                    Never seen them before, must be pretty rare?
                                    I couldn’t find much info about them, I know they also do a front rotor guard too.

                                    Rear disc guard, calliper guard and master cylinder guard all in one! Result...
                                    All metal, OEM and a wicked vintage Mx look too.

                                    S 1 Reply Last reply 17 Oct 2020, 11:03
                                    0
                                    • S Stevie Wonder
                                      15 Oct 2020, 19:32

                                      @Calum said in Stevie’s French '98, Mid-90's WR/YZ/DT (An idiotproof guide to building your own DTR):

                                      @SpookDog Taper bearing. No it needed the cup. The overall height of the forks are a good few cm taller.

                                      Taper bearingsss. Unsealed bearings just make me uncomfortable tbh.
                                      If spookdog chucks those photos on my old USD post it’ll make Callum’s explanation a lot easier to understand as quite a few people still seem to believe that straight swapping the stems is a visible option.
                                      Perfect for someone like me who hadn’t the foggiest.

                                      In other news...
                                      A while back I stumbled across these. I was on eBay and trying to find a WR200 calliper guard (3JD-2749-100) when I come across these little gems.

                                      link text
                                      Never seen them before, must be pretty rare?
                                      I couldn’t find much info about them, I know they also do a front rotor guard too.

                                      Rear disc guard, calliper guard and master cylinder guard all in one! Result...
                                      All metal, OEM and a wicked vintage Mx look too.

                                      S Offline
                                      S Offline
                                      Stevie Wonder
                                      wrote on 17 Oct 2020, 11:03 last edited by
                                      #61

                                      @SpookDog said in Stevie’s French '98, Mid-90's WR/YZ/DT (An idiotproof guide to building your own DTR):

                                      I haven’t had a chance to get a really good look into it. It’s just replacing the right side spacer with the gearwheel. Matching the diameter of the front wheel spindle and width. Then fixing 1 or 3 ‘teeth’ to the wheel hub to drive the gear-wheel...
                                      That’s oversimplifying it, but it 😜 ...
                                      I’ll get round to it when I finish MOT readying my bike. Weather s’been A bit of a bee-atch lately...
                                      If someone has done it already I’d love a link...

                                      I don’t think anyone’s done it before bud, but I think me and you where planning the same/similar thing!

                                      The YZ wheel I have is in good nick, only needs a couple spokes replaced nothing drastic!
                                      (Funnily enough too in my years riding BMX I picked up how to lace and true wheels.
                                      Never in all my time doing sick stuntzz did I think that’d get use on a motorbike)

                                      Only issue is being from a YZ theres no ‘teeth’ for the speedo gear drive to be driven by... shit!
                                      alt text
                                      See this ‘96 YZ front? Missing something

                                      alt text
                                      Teeth! Not how one rim is a ‘96 and the latter an ‘04.

                                      That’s where like you mentioned I was thinking of just getting someone with a welder to fix that for me. £160 for WRF wheel with tabs or £30/£40 for welding some tabs? I know what I’d choose 😉
                                      Although just to save me relying on someone else I’ll probably buy a WRF wheel and sell the YZ. Perhaps a breakers would take it in Part-Ex?

                                      Anyway...
                                      From what I can tell there’s a lot of interchangeability going on with the front ends from ‘96-‘02 the YZ, WRF line. Flexibility.
                                      However even though front wheel and forks appear to be shared up until ‘06 a quick cross reference does not suggest the same for much of the speedo drive assy.
                                      Fowler’s reckons they’re the same from ‘98-‘03 and then after they change.
                                      Regardless It’s the speedo drive gear and cable that’s important to me so I can get those clocks working.
                                      alt text
                                      Not that I have any issue with not knowing my speed, it’s just I miss approaching speeding cameras and slowing to ridiculous speeds because I can’t read KPH or the DT can’t stop quick enough far too much

                                      One More Thing
                                      I very early on said interchangeability and convenience was so so so important to me with my build. I want everything to bolt on and bolt off nicely, Function over form right? Imagine the weathers nice and I just want to put some road/trail tyres on whilst it’s a sunny. I don’t want to spend an 45+ minutes changing set ups. That’s 45+ minutes riding lost.

                                      Unlike a lot of people the SM setup doesn’t do it for me. that’s why I’m stealing @Glynn123 idea I found, custom machined axle for DTR/WR200 hub. WR200 brake disc because same size rotor as ‘02 YZ except it fits DT because same hub obviously. Very very clever idea that fits me perfectly. 21”-19” Excel’s and AC10’s for partying, 21”-18” DT hoops with Pirelli MT21’s or Kenda K270’s for chilling. Bangingggg 😍

                                      Stevie WonderS 1 Reply Last reply 18 Oct 2020, 17:51
                                      0
                                      • Stevie WonderS Stevie Wonder
                                        17 Oct 2020, 11:03

                                        @SpookDog said in Stevie’s French '98, Mid-90's WR/YZ/DT (An idiotproof guide to building your own DTR):

                                        I haven’t had a chance to get a really good look into it. It’s just replacing the right side spacer with the gearwheel. Matching the diameter of the front wheel spindle and width. Then fixing 1 or 3 ‘teeth’ to the wheel hub to drive the gear-wheel...
                                        That’s oversimplifying it, but it 😜 ...
                                        I’ll get round to it when I finish MOT readying my bike. Weather s’been A bit of a bee-atch lately...
                                        If someone has done it already I’d love a link...

                                        I don’t think anyone’s done it before bud, but I think me and you where planning the same/similar thing!

                                        The YZ wheel I have is in good nick, only needs a couple spokes replaced nothing drastic!
                                        (Funnily enough too in my years riding BMX I picked up how to lace and true wheels.
                                        Never in all my time doing sick stuntzz did I think that’d get use on a motorbike)

                                        Only issue is being from a YZ theres no ‘teeth’ for the speedo gear drive to be driven by... shit!
                                        alt text
                                        See this ‘96 YZ front? Missing something

                                        alt text
                                        Teeth! Not how one rim is a ‘96 and the latter an ‘04.

                                        That’s where like you mentioned I was thinking of just getting someone with a welder to fix that for me. £160 for WRF wheel with tabs or £30/£40 for welding some tabs? I know what I’d choose 😉
                                        Although just to save me relying on someone else I’ll probably buy a WRF wheel and sell the YZ. Perhaps a breakers would take it in Part-Ex?

                                        Anyway...
                                        From what I can tell there’s a lot of interchangeability going on with the front ends from ‘96-‘02 the YZ, WRF line. Flexibility.
                                        However even though front wheel and forks appear to be shared up until ‘06 a quick cross reference does not suggest the same for much of the speedo drive assy.
                                        Fowler’s reckons they’re the same from ‘98-‘03 and then after they change.
                                        Regardless It’s the speedo drive gear and cable that’s important to me so I can get those clocks working.
                                        alt text
                                        Not that I have any issue with not knowing my speed, it’s just I miss approaching speeding cameras and slowing to ridiculous speeds because I can’t read KPH or the DT can’t stop quick enough far too much

                                        One More Thing
                                        I very early on said interchangeability and convenience was so so so important to me with my build. I want everything to bolt on and bolt off nicely, Function over form right? Imagine the weathers nice and I just want to put some road/trail tyres on whilst it’s a sunny. I don’t want to spend an 45+ minutes changing set ups. That’s 45+ minutes riding lost.

                                        Unlike a lot of people the SM setup doesn’t do it for me. that’s why I’m stealing @Glynn123 idea I found, custom machined axle for DTR/WR200 hub. WR200 brake disc because same size rotor as ‘02 YZ except it fits DT because same hub obviously. Very very clever idea that fits me perfectly. 21”-19” Excel’s and AC10’s for partying, 21”-18” DT hoops with Pirelli MT21’s or Kenda K270’s for chilling. Bangingggg 😍

                                        Stevie WonderS Offline
                                        Stevie WonderS Offline
                                        Stevie Wonder
                                        wrote on 18 Oct 2020, 17:51 last edited by Stevie Wonder
                                        #62

                                        Note To Self

                                        Racebikes don’t have road bike stuffs...
                                        There’s me thinking I learned my lesson when I realised the tabs on the DT200WR swingarm matched a DT’s mudguard suspiciously well 😅 😂

                                        Well I made an oops again 😂
                                        Just realised YZ forks need locator tabs for the gear drive. Reckon some JB weld would hold up? Hahaha
                                        alt text

                                        Note To Everyone
                                        MAKE YOUR LIFE EASIER AND BUY A WRF FRONT END 😂😂😂

                                        So now I gotta sort some tabs (and not the ones that‘ll make the likes of Pink Floyd and Jefferson Airplane infinitely more enjoyable) to make the drive gear thing not an issue.

                                        I saw my uncle yesterday and we got chatting bo an alternative option was to see if we could use what we already had.
                                        The idea being that turn down the YZ axle for the DT wheel or buy some custom bearings from a local shop to just run the stock DT front wheel but with WR200 front rotor so everything matches up with the YZ brakes.
                                        Really its just a spitball idea that we never got much of a chance to talk about but an idea nonetheless + still the issue of the gear drive locator tabs.

                                        Something Else
                                        Whilst this was going on I was looking at what guys in the motorcross and enduro scene have been doing over the years to solve this problem when I stumbled across this little gadget

                                        alt text

                                        link text

                                        The “Daytona Asura” a very smart tidy little computer lesser known and used from what I’ve found. From what I can tell it’s been about for sometime and for whatever reason never got the attention of those “Trailtech: Vapour” units you see everyone and there mum owning.

                                        Unlike the trailtech it’s cheaper and has an oil light, temperature gauge (for both Air and Engine) and a much much nicer display.

                                        CalumC 1 Reply Last reply 18 Oct 2020, 18:47
                                        0
                                        • Stevie WonderS Stevie Wonder
                                          18 Oct 2020, 17:51

                                          Note To Self

                                          Racebikes don’t have road bike stuffs...
                                          There’s me thinking I learned my lesson when I realised the tabs on the DT200WR swingarm matched a DT’s mudguard suspiciously well 😅 😂

                                          Well I made an oops again 😂
                                          Just realised YZ forks need locator tabs for the gear drive. Reckon some JB weld would hold up? Hahaha
                                          alt text

                                          Note To Everyone
                                          MAKE YOUR LIFE EASIER AND BUY A WRF FRONT END 😂😂😂

                                          So now I gotta sort some tabs (and not the ones that‘ll make the likes of Pink Floyd and Jefferson Airplane infinitely more enjoyable) to make the drive gear thing not an issue.

                                          I saw my uncle yesterday and we got chatting bo an alternative option was to see if we could use what we already had.
                                          The idea being that turn down the YZ axle for the DT wheel or buy some custom bearings from a local shop to just run the stock DT front wheel but with WR200 front rotor so everything matches up with the YZ brakes.
                                          Really its just a spitball idea that we never got much of a chance to talk about but an idea nonetheless + still the issue of the gear drive locator tabs.

                                          Something Else
                                          Whilst this was going on I was looking at what guys in the motorcross and enduro scene have been doing over the years to solve this problem when I stumbled across this little gadget

                                          alt text

                                          link text

                                          The “Daytona Asura” a very smart tidy little computer lesser known and used from what I’ve found. From what I can tell it’s been about for sometime and for whatever reason never got the attention of those “Trailtech: Vapour” units you see everyone and there mum owning.

                                          Unlike the trailtech it’s cheaper and has an oil light, temperature gauge (for both Air and Engine) and a much much nicer display.

                                          CalumC Offline
                                          CalumC Offline
                                          Calum
                                          wrote on 18 Oct 2020, 18:47 last edited by
                                          #63

                                          @Stevie-Wonder Looks like a Trial Tech copy Unit to me. The Trialtech does have Oil Light/Neutral Light/Indicator Light/Fuel Light/High Beam Light. Also has shift lights aswell. So I'm not sure this unit is any better.

                                          I'm struggling to understand what the problem is? Why don't you just fit the forks etc that you've got on. Your reasoning about swapping it all out in a few minutes is moot at this point as you've spent more time debating what setup to go with than just doing sticking with what you got. At the end of the day, it doesn't take very long to swap the front end out of the bike so you shouldn't focus on it so much.

                                          Just use the setup you've got, chuck the USDs on and just enjoy it. If for whatever reason you want the stock setup, then it's a few hours work and you're rolling again. Rather than months of umming and arring when you could be out enjoying 🤷

                                          Always Originate, Never Pirate!

                                          Stevie WonderS 1 Reply Last reply 18 Oct 2020, 23:24
                                          0
                                          Reply
                                          • Reply as topic
                                          Log in to reply
                                          • Oldest to Newest
                                          • Newest to Oldest
                                          • Most Votes

                                          53/211

                                          14 Oct 2020, 13:56

                                          158 unread

                                          • Login

                                          • Don't have an account? Register

                                          • Login or register to search.
                                          53 out of 211
                                          • First post
                                            53/211
                                            Last post
                                          0
                                          • Recent
                                          • Tags
                                          • Popular
                                          • Users
                                          • Groups