Giannelli vs stock
-
@jonne123 Probably won't be that much in it then over a budget pipe. Usually it's the weight of the stock pipe that does it.
Bang for buck in my experience, is swapping the ignition system out for a Zeeltronic.
But I have no experience with the 94 CDI.
Tuning is an art, and not a single component on its own will make that much of a difference. But getting a collection of supporting mods will.
What head are you running? The earlier ones ran the restrict 3BN head. And having that changed will make a difference. 3MB heads came factory fitted to the later models, but are getting hard to come across these days. Having the restriction removed would cost less than finding a decent 3MB head. Talking £35 to have the head modified.
-
@jonne123 Probably won't be that much in it then over a budget pipe. Usually it's the weight of the stock pipe that does it.
Bang for buck in my experience, is swapping the ignition system out for a Zeeltronic.
But I have no experience with the 94 CDI.
Tuning is an art, and not a single component on its own will make that much of a difference. But getting a collection of supporting mods will.
What head are you running? The earlier ones ran the restrict 3BN head. And having that changed will make a difference. 3MB heads came factory fitted to the later models, but are getting hard to come across these days. Having the restriction removed would cost less than finding a decent 3MB head. Talking £35 to have the head modified.
-
https://www.youtube.com/watch?v=cAQ_cvYRgsg
Has anyone found something that is cheaper than the original exhaust rubber?
-
@declan I think I tried that and it didn't work.
Honest to God, the exhaust joining rubbers did my nut in on my DT. Glad I don't have that anymore.
-
Yeah, it's the same engine. There are a few mounts that aren't right. And the tail pipe is off every slightly. So needs a joiner.
Not particularly worth it IMO. Unless it doesn't cost you anything to make the parts and/or the part you're buying is dirt cheap.
So to confirm.
- Front mount won't align on the expansion chamber
- Middle Mount on expansion chamber won't align
- Rear Silencer doesn't align
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login