'92 Yamaha WR200
-
@Challenger Thank you very much for your quick reply! You helped me a lot! Thanks!
-
Today the black rear wheel from WR125X arrived.
Its a funny thing that I keep buying the SM stuff that I will barely use as I prefer the off-road wheels, but its a nice addition to have for the bike. And it was just so cheap I couldnt pass it.
So thats how the SM wheels setup of a guy that preferes offroad looks like:
(wheels are dirty on the pic, the first pic shows the black rear wheel after cleaning)And currently Im waiting for my second WR frame to be back from powder coating. I will be switching the frame in the bike.
And I also got some work done on my 3rd project
Does anyone recognize this engine?
-
Today the black rear wheel from WR125X arrived.
Its a funny thing that I keep buying the SM stuff that I will barely use as I prefer the off-road wheels, but its a nice addition to have for the bike. And it was just so cheap I couldnt pass it.
So thats how the SM wheels setup of a guy that preferes offroad looks like:
(wheels are dirty on the pic, the first pic shows the black rear wheel after cleaning)And currently Im waiting for my second WR frame to be back from powder coating. I will be switching the frame in the bike.
And I also got some work done on my 3rd project
Does anyone recognize this engine?
-
@Challenger DT250 engine?
Yeah nice setup of sumo rollers
@Calum naa, you need to think more off-road, not dual sport types of old yama bikes
And also I forget to mention that I keep bending the original rims, of course they are known from rotting from the inside which i cleaned as good as I could, but there is no point for me to change them for new ones if they will be bent in a couple of rides.
But I have an extra set of enduro wheels too, so thats not a big problem -
Dayum
You need to be less harsh to your wheels.
Are these aluminium wheels? You might be better off with the DTR Rims which could be stronger being steel.
@Calum yes, they are aluminium, but the front DT wheel wont fit because of the different brake disc. I will probably just ride the both sets of enduro wheels and when they will be all bent I'll buy some new rims. Other than that I want to keep this bike as close to original as I can. Now it has the cylinder sleeve instead of nicasil plating already(which I think is a good choice for this bike) but I dont want to use the heavy steel wheels. I dont even think they would be that much tougher. Almost all of the DT's I saw had a bent on a front rim.
But yeah, I just like to go full throttle on the rubble covered roads sometimes
-
@Calum yes, they are aluminium, but the front DT wheel wont fit because of the different brake disc. I will probably just ride the both sets of enduro wheels and when they will be all bent I'll buy some new rims. Other than that I want to keep this bike as close to original as I can. Now it has the cylinder sleeve instead of nicasil plating already(which I think is a good choice for this bike) but I dont want to use the heavy steel wheels. I dont even think they would be that much tougher. Almost all of the DT's I saw had a bent on a front rim.
But yeah, I just like to go full throttle on the rubble covered roads sometimes -
@Challenger
I’ve had steel wheels rust out inside, never had an ally one ‘rot’. It just looks like you stoked it on a rock. You might be able to get it straightened with heat. You’d have to retemper the metal after though...It looks like this, this was the worst rim I had. It was a common problem in the WR200, the rims from YZ's and DT200R didnt rot as bad.
-
Pandemic hits hard. During the times where i got nothing to do, i rebuilt my old man's bike and it ended up looking like yours! After he discovered what I did, he ended up gifting it to me for my hard work on his bike itself.
-
Pandemic hits hard. During the times where i got nothing to do, i rebuilt my old man's bike and it ended up looking like yours! After he discovered what I did, he ended up gifting it to me for my hard work on his bike itself.
My dt200wr is stuck in my garage right now going no where as my coolant tank is dead - let me know if you have any spares for sale as I also could do with a decent 2 stroke tank as well
-
My dt200wr is stuck in my garage right now going no where as my coolant tank is dead - let me know if you have any spares for sale as I also could do with a decent 2 stroke tank as well
@nottsbiker was it you asking about the coolant tank on facebook group? I sent you the link to ebay item, what was wrong with it?
@donaldmendez nice story, would be nice to see the result here
-
@nottsbiker was it you asking about the coolant tank on facebook group? I sent you the link to ebay item, what was wrong with it?
@donaldmendez nice story, would be nice to see the result here
Yes it is me on FB
From memory one tank (the good one) sold before I could get to it and the other one (painted) was too shabby to use unfortunately.
I'm keeping an eye out for a NOS one but this might be a never gonna happen type scenario
Just picked up a NOS headlight surround and complete throttle cable to go with some other bits I've got stashed away so there are good bits still out there
Ben
-
Yes it is me on FB
From memory one tank (the good one) sold before I could get to it and the other one (painted) was too shabby to use unfortunately.
I'm keeping an eye out for a NOS one but this might be a never gonna happen type scenario
Just picked up a NOS headlight surround and complete throttle cable to go with some other bits I've got stashed away so there are good bits still out there
Ben
@nottsbiker I still have it, just pulled it off the .co.uk because of brexit and plane travel ban
Been riding a bit on the WR this weekend - its hard. No matter how well I dress its still cold, its even hard to start and warm the bike - it doesnt have a thermostate so it takes a lot of time when its -15*C outside. But it was still fun, tried to do some sideways action
And, as always there is a short video:
https://youtu.be/YRDS9X1Jg7s -
@nottsbiker I still have it, just pulled it off the .co.uk because of brexit and plane travel ban
Been riding a bit on the WR this weekend - its hard. No matter how well I dress its still cold, its even hard to start and warm the bike - it doesnt have a thermostate so it takes a lot of time when its -15*C outside. But it was still fun, tried to do some sideways action
And, as always there is a short video:
https://youtu.be/YRDS9X1Jg7sLol I nearly messaged you via ebay but then I assumed it had sold
If you have anything for sale feel free to PM me a list via FB or here
-
@Calum yes, they are aluminium, but the front DT wheel wont fit because of the different brake disc. I will probably just ride the both sets of enduro wheels and when they will be all bent I'll buy some new rims. Other than that I want to keep this bike as close to original as I can. Now it has the cylinder sleeve instead of nicasil plating already(which I think is a good choice for this bike) but I dont want to use the heavy steel wheels. I dont even think they would be that much tougher. Almost all of the DT's I saw had a bent on a front rim.
But yeah, I just like to go full throttle on the rubble covered roads sometimes@challenger said in '92 Yamaha WR200:
@Calum yes, they are aluminium, but the front DT wheel wont fit because of the different brake disc. I will probably just ride the both sets of enduro wheels and when they will be all bent I'll buy some new rims. Other than that I want to keep this bike as close to original as I can. Now it has the cylinder sleeve instead of nicasil plating already(which I think is a good choice for this bike) but I dont want to use the heavy steel wheels. I dont even think they would be that much tougher. Almost all of the DT's I saw had a bent on a front rim.
But yeah, I just like to go full throttle on the rubble covered roads sometimesI might be late to the party but am I not right in saying that the WR200 disc bolts on to the DT125 hub and vice Versa?
-
@challenger said in '92 Yamaha WR200:
@Calum yes, they are aluminium, but the front DT wheel wont fit because of the different brake disc. I will probably just ride the both sets of enduro wheels and when they will be all bent I'll buy some new rims. Other than that I want to keep this bike as close to original as I can. Now it has the cylinder sleeve instead of nicasil plating already(which I think is a good choice for this bike) but I dont want to use the heavy steel wheels. I dont even think they would be that much tougher. Almost all of the DT's I saw had a bent on a front rim.
But yeah, I just like to go full throttle on the rubble covered roads sometimesI might be late to the party but am I not right in saying that the WR200 disc bolts on to the DT125 hub and vice Versa?
The rear does, the front hub has a unique 3XP part number for the DT200WR and WR200 only
-
The rear does, the front hub has a unique 3XP part number for the DT200WR and WR200 only
@nottsbiker I'm pretty sure a wr400 wheel fits with the right spacers each side. My bike came with a spare set of wheels, the front one was a wr400. I didn't ever fit it but the previous owner said he used it with his off road tyres.
Also I'm pretty sure a TT or TTR model shares the same front disc
-
@nottsbiker I'm pretty sure a wr400 wheel fits with the right spacers each side. My bike came with a spare set of wheels, the front one was a wr400. I didn't ever fit it but the previous owner said he used it with his off road tyres.
Also I'm pretty sure a TT or TTR model shares the same front disc
I read the question as WR200 disc fits DT125R in which case the front wont as the hub is unique. The rear is a direct swap
I have a DT230 Lanza front disc on my DT200WR
-
@nottsbiker I still have it, just pulled it off the .co.uk because of brexit and plane travel ban
Been riding a bit on the WR this weekend - its hard. No matter how well I dress its still cold, its even hard to start and warm the bike - it doesnt have a thermostate so it takes a lot of time when its -15*C outside. But it was still fun, tried to do some sideways action
And, as always there is a short video:
https://youtu.be/YRDS9X1Jg7sFunds sent for coolant tank and front fender
-
I read the question as WR200 disc fits DT125R in which case the front wont as the hub is unique. The rear is a direct swap
I have a DT230 Lanza front disc on my DT200WR
@nottsbiker said in '92 Yamaha WR200:
I read the question as WR200 disc fits DT125R in which case the front wont as the hub is unique. The rear is a direct swap
I have a DT230 Lanza front disc on my DT200WR
The hub might not matter as long as the bolt pattern and spacing are correct. I’m sorry to keep kicking this up but I read it on here somewhere and can’t find the old post.
