CB750 scrambler project
-
@Louis-DT-WR BRAP BRAP BRAP, sounds beastly dude!!!
@NINJA it is very beastly sounding if I say so
I didn't know what to expect. Definitely will wear ear defenders next time -
I know it's not the same, but my RS is too loud for prolonged use without ear plugs. My ears are literally ringing from the noise. I am a sensitive lad though.
-
@Calum we all like a noisy exhaust until you ride a long journey with one, then it just gets annoying
-
@Louis-DT-WR ive never been a fan of loud exhausts i prefer a good quality exhaust note
@declan said in CB750 scrambler project:
@Louis-DT-WR ive never been a fan of loud exhausts i prefer a good quality exhaust note
Agreed. I prefer quiet engines that make power. Turbo Flutter is a must.
Now an eargasm superbike inline 4 that's a win.
But I can't stand loud Hondas that make fack all power.
Always Originate, Never Pirate!
-
@declan said in CB750 scrambler project:
@Louis-DT-WR ive never been a fan of loud exhausts i prefer a good quality exhaust note
Agreed. I prefer quiet engines that make power. Turbo Flutter is a must.
Now an eargasm superbike inline 4 that's a win.
But I can't stand loud Hondas that make fack all power.
-
@Calum like all the kids in corsas with cherry bombs
all noise and can't even pull the gear with their 4 mates in the car eating maccys 
@Louis-DT-WR Not being funny, my Starlet wouldn't pull with four kids in it and that's actually a rapid motor. I mean it's no Skyline but it's still 133hp out of a 1.3 860Kgs from 1989.
-
@declan said in CB750 scrambler project:
@Louis-DT-WR ive never been a fan of loud exhausts i prefer a good quality exhaust note
Agreed. I prefer quiet engines that make power. Turbo Flutter is a must.
Now an eargasm superbike inline 4 that's a win.
But I can't stand loud Hondas that make fack all power.
-
@Darty said in CB750 scrambler project:
Honda Civic EG6
It's purely the fact that it's low weight and turbo'd. It's competitive let's just say that.
Difference is, those B16s can be tuned to the moon, the 4EFTEs are running into issues around the 400hp mark. Gearbox is sketchy at 300+.
-
@Calum It’s probably quicker than my Honda Civic EG6 B16 - 170hp
,@Louis-DT-WR This has turned out real nice! Bet those tyres are loud
@Darty cheers man, yes just went for a little spin around the ind. EST.
Struggling to change gear....
After some checks, it looks like I was sent the cb750 nighthawk gear linkage.... The bikes share a lot of parts but the lever sits in a different position so the leverage isn't correct for a sevenfifty.But she pulls nicely, actually not too loud
-
Doing the finishing touches. I really like this headlight guard.. took a bit of adapting to fit.
-
Got all gears back now
Playing around with the appearance.
Covered all the yellow protaper logos.
Blacked out the white seat band.Made up a tank strap belt from a shotgun cartridge belt.
I'll probably out some empty cartridges in it.
I didn't like the "open" side of the belt facing up on the side stand.
-
Nearly finished, I'm going to make up a front fender for a scrambler look
-
Nearly finished, I'm going to make up a front fender for a scrambler look
-
@Louis-DT-WR Looking mighty fine there bud!!!
@NINJA thanks man. I didn't think I'd actually finish it within a year
-
Here's a totally random and probably going to take a long time project.
I bought a chassis with v5 very cheap.
yzfR6 front end
Longer cognimoto steering stem. + Top yoke
Continental tkc80 tyres.
Custom tank.
Seat will probably be changed again.
Currently restoring the carbs.
Frame is at the Powder coater after cutting and welding for the seat hoop and tank mounts.I'll get the rolling chassis built up, then custom fenders, battery box, install brakes, controls, lights etc.
If I see a really good bargain on the parts I have just bought them and started cleaning (carbs, look, CDI, )
Going for satin black with some shiny features, modified exhaust and custom intake airbox.
Probably Bitten off more than I can chew so I'll be doing it whenever I get a chance.
@louis-dt-wr You almost started from scrap, this one for sure took a long but worthy of your time. its looking amazing pal, are you planning on selling it?? if so, i am interested! lol
-
@louis-dt-wr You almost started from scrap, this one for sure took a long but worthy of your time. its looking amazing pal, are you planning on selling it?? if so, i am interested! lol
@donaldmendez
Thanks, it didn't take anyway near as long as I thought to get it up and running. I've just been doing some final touches.
I'm going to ride this one on nice days
Here's how she stands now.
