Dtx Project Codename Moneypit
-
What do you guys think about quick action throttles? Found it on ebay randomly chasing parts.
-
@declan I have aftermarket throttle too but not sure if quick action . Maybe 1/2 turn or 1/3
-
Yeah all the time something silly with the bike but still love it dont know why haha.
Bike mechanic stopped there for help , after 5 min he told me that its in gearbox. Bent fork or something but dont know about the coolant as I am bumpstart it and as far as I didnt stopped the engine sounded sweet , couldnt change gear or release the clutch . Yeah. Made it home 7 miles on 2nd gear with clutch lever. Full coolant overflow tank but cylinder and head is dry and clean.
Not sure which section to choose mate.wrote on 23 May 2017, 20:25 last edited by Mightyman@Zrako
TurningTuning zone engine probably the best bet.Bent selector forks. That is only going to happen on faulty installation surely. Thst or you have been crazy shifting. I have ran my dt without a clutch for months with no issues.
-
wrote on 7 Sept 2017, 00:47 last edited by
Well , today Im finished my USD forks conversion on my "moneypit DT "
. I've been working on it for a few weeks... firstly Im bought Ktm exc 300 forks from 2002 and same seller was selling ktm 450 forks from 2003 too so ended up eith 2 sets Im thought they are exactly same silly. Liked the 450 ones I think they are 48mm so decided to put them on. And will make everything required to direct fit on Dt the other ones 300 for sale. Measured everything 100 times and even after that the machined components wasnt 100% so I had to modify them after typical for me
Here if few pics from my garage , going to test ride and adjust them tomorrow.
Brake line and speedo cable is a bit shorter than it should be but its ok adjusted. Now just need upgrade the wrap around handguards and thats it. Sorry for so many pics
hopefully you will like it guys because I love it 
-
wrote on 7 Sept 2017, 06:48 last edited by
Very nice man. You've got plenty of room on that Speedo bracket, you could fit a few more bits
I've always wanted to fit a clock but haven't got round to it yet! -
wrote on 7 Sept 2017, 07:28 last edited by
That looks awesome mate. Bet it corners like a dream now!
-
Well , today Im finished my USD forks conversion on my "moneypit DT "
. I've been working on it for a few weeks... firstly Im bought Ktm exc 300 forks from 2002 and same seller was selling ktm 450 forks from 2003 too so ended up eith 2 sets Im thought they are exactly same silly. Liked the 450 ones I think they are 48mm so decided to put them on. And will make everything required to direct fit on Dt the other ones 300 for sale. Measured everything 100 times and even after that the machined components wasnt 100% so I had to modify them after typical for me
Here if few pics from my garage , going to test ride and adjust them tomorrow.Brake line and speedo cable is a bit shorter than it should be but its ok adjusted. Now just need upgrade the wrap around handguards and thats it. Sorry for so many pics
hopefully you will like it guys because I love it -
wrote on 7 Sept 2017, 11:45 last edited by
Thanks guys , cant wait to go test it properly but raining like crazy every 10 minutes
-
wrote on 7 Sept 2017, 11:55 last edited by
Your pictures seem to be blocked by my work fire wall so I cannot see them but it might be an idea to do a write up on the fork install to help others who want to do a similar job.
-
Your pictures seem to be blocked by my work fire wall so I cannot see them but it might be an idea to do a write up on the fork install to help others who want to do a similar job.
wrote on 7 Sept 2017, 12:06 last edited by@nottsbiker yeah trying to get the drawings ready as all them I made was wrong at some stage I had to modify the parts on the go
but good idea , i will try to get it together and write a small step by step tutorial 
-
Your pictures seem to be blocked by my work fire wall so I cannot see them but it might be an idea to do a write up on the fork install to help others who want to do a similar job.
wrote on 7 Sept 2017, 14:21 last edited by@nottsbiker I've already done this mate it is in the tutorial section
-
wrote on 7 Sept 2017, 19:26 last edited by
Ok thanks
