wheelies

[britshgigolo]

with power valve set up right you will feel the diffrence and with a few more revs it will pop up as when it hits 6000 revs the power valve will be fully open so make sure power valve is set right and plenty of revs it will come up no problems

[anima]

thankyou, pv servo working or pinned open ? sorry bit of a noob

[Calum]

Removed baffles? it isn't a four stroke mate you need solid back pressure as to allow the supersonic sound wave to pressurise appropriately to allow the forced induction to operate.

[anima]

i dunno mate but it was alot faster than it is now acceleration wise. like i said no expert im a noob, i can only theorise that the dents he put in the pipe were to compensate for the baffles being removed.

[britshgigolo]

you want it working and not pinned just make sure it flush you can try sitting further back on the seat to as that will help but as i said with it set right you will see the diffrence mine comes up from pull away and im 16 stone and tops out at 85 on the clock so im sure yours should do the same if running and set up right

[anima]

appreciated

[anima]

@britshgigolo do you have your reed switch removed ? and what exhaust pipe have u got on it ?

[vtrn_raptor]

Deps supposed to be better than big one

[britshgigolo]

yes reed switch is taped up under the clocks out the way and it got standard exhaust on front derestricked and dep silencer

[anima]

@vtrn_raptor i have a dep pipe just havent fitted it and stil havent fitted my 240 jet either

[anima]

@britshgigolo nice one i may have to fit my dep its sat there i just havent bothered fitting it

[britshgigolo]

im sure yours is 2001 same as mine it should have a 240 main jet as standard and mine is in use every day for work same as yours i change oil and plugss once a month and all has been fine

[britshgigolo]

you will notice the diffrence once dep is fitted too

[anima]

@britshgigolo my dad is adimant i wont i think hes wrong though i just think he may be trying to keep me at a low as speed as possible

[Darty]

Your not going to find much extra power, get her jetted nice first,

Raise the rear the ride height,, and gear it down (bigger sprockets) will help dramatically!

[anima]

am i right in thinking that big one expansion chambers are restricted anyway ? i have heard so and i can see a kind of mesh thing near the echaust manifold but in the start of the chamber pipe

[britshgigolo]

im running standard sprocket set up as standard as did not want to lose top end as use a roads as well

[britshgigolo]

i dont know much about exhaust to be fair only everyone says dep are the best buth rust like hell thas why i stayed with the standard pipe and de risticked it

[anima]

@Darty its pretty highly jacked anyway but illl look into a jack up kit

[Darty]

@anima no idea,

but BigOne expansion chambers are designed to make more Midrange torque, a proper homologated road pipe,

If there is a baffle in the expansion chamber, then defo remove it tho,