My dt125r/wr200 project
-
@andrewj1680 Right, makes sense.
My bike already had zeeltronic and I thought it pulled fairly hard regardless.
-
@calum maybe that's why you didn't feel much from it as I know with zeeltronic you can programme the way the powervalve comes in so it comes in stronger where as I think Yamaha bring it in gradually, I might not feel much difference from the 200 being done as my 125 didnt have the servo fitted so when the powervalve does come on it comes on strong anyway where as I'm running the 200 on the wr loom and management along with the 5 wire servo
-
How radical is the porting compared to standard? I'm guessing you can specify what type of tune you want, or is it like the old Stan Stevens stage 1, 2, 3 system?
-
I'm normally asked what I want from the bike so I'm guessing he will time it to meet your needs, I don't hang around and don't like to sit in traffic so I just tell him to go all out with it
-
Will be interested to hear how it rides on the road when built up.
Can't beat a healthy two stroke on the road
-
My dtr pulls hard all the way to red line with the cylinder and head he did for that, it used to drop off top end however it doesn't anymore, imo it's worth the money
-
@nottsbiker Yeah it's not really stage this stage that.
It's more, I run the bike 10K plus and thus the porting should accomodate this, I.E. very late port timings causing lots of lost air and fuel below peak power, or I want punchy mid range, which would tell him how it should be ported.
-
I think I'd go for mid range as most of my riding is around the city centre and quick get aways with an easy wheelie or two is ideal for me
-
@nottsbiker mine is ported for top end but will still come up on the back wheel in 3rd
-
Glad to hear
-
Well that's the pic update out the question lol loads of nice fresh red bits frame, rear shock spring, radiator mounts,headlight bracket, rear peg mounts and rear grab handle all done Rosso red
-
@andrewj1680 did you have to remove the spring for painting?
-
@ricky0115 Yeah but it's not a hard job to do
-
-
@ricky0115 You basically compress the spring. which allows you to remove the retaining washer. It then just slides off.
-
I compressed it by hand so there isn't a lot of tension on the really and I'm running the dt200wr rear shock setup so it's possibly easier to do giving that you can turn the stiffness to suit
-
I don't know alot about it but I do know it totally changed my 125 which is why I gave him the 200 as I know he seems to know his stuff he seems to be pulling good power figures to anything he puts his hands too
