Wr 200 or similar bolt on upgrades for the dtr
-
There is also the DT230 Lanza, which came with alloy wheels and alloy swingarms which are said to be a direct fit.
I am yet to actually find an alloy swingarm from a Lanza, but that's what I've been told.
-
The WR200 and DT200's have alloy swingarms but the Lanza i have seen had steel so they might vary on the 230.
The 3ET 200R is a direct swap but not sure on the WR / DT-WR's
-
The WR200 and DT200's have alloy swingarms but the Lanza i have seen had steel so they might vary on the 230.
The 3ET 200R is a direct swap but not sure on the WR / DT-WR's
@nottsbiker So @scrimsmustang told me that there is a Lanza with an alloy swingarm. I don't doubt that he may be mistaken, but he is very knowledgeable about Yamaha's and so I do believe him.
-
-
-
-
Yes which is why I was unsure about all 230's but looking at the that picture it looks the same as the old 200R
-
That 230 lanza looks very similar to the wr200 apart from the front forks but even the frame looks the same -
That 230 lanza looks very similar to the wr200 apart from the front forks but even the frame looks the same@andrewj1680 Lanza is just a DTRE and they are garbage, stripped a few for parts and projects over the years. Engine is very poor cant take stick.
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login