Yamaha dt125 re restore

[NINJA]

@kevb1967 I had the same problem, @Calum may know why?

[Calum]

@ninja this website doesn't support image hosting. Image hosting is expensive so I rely on third psrty file hosting.

[NINJA]

@calum OK Good-to-know, I'll use imgur in future.

[kevb1967]

before photos
https://imgshare.io/image/s-l1600.pMUQGj
https://imgshare.io/image/s-l1600-5.pMUtwS
https://imgshare.io/image/s-l1600-2.pMUDyK
https://imgshare.io/image/s-l1600-6.pMUF08
https://imgshare.io/image/s-l1600-9.pMUVfw

[Calum]

@kevb1967 yeah wow, that could do with a freshen up! Looking forward to seeing more.

[kevb1967]

bought it off eBay with 2 boxes of parts and a spare engine has been in a garage for 11 years as exhaust was coked up and it melted the battery compartment so it was partly dismantled
https://imgshare.io/image/s-l1600-8.pMknLO
https://imgshare.io/image/s-l1600-7.pMk72Q
water pump broken
barrel exhaust studs striped
clutch cable broken
power vale seized solid
rear break caliper seized
just to start with

[kevb1967]

after a deep clean and de coke of top end ,has std piston with no ware signs at all power valve de coked and new seals fitted new stainless exhaust threads new dep front pipe rear cleaned new battery compartment and new battery, new water pump kit and new drive and gear oil seals
https://imgshare.io/image/bdzf9050.pMu79K

[kevb1967]

replacement plastics fitted and graphics all new oil lubricant's
power vale lined up ,oil pump set up was way too high .carb cleaned and up jetted to 230 from 210 new front and back sprockets ,swing arm resprayed on bike mot passed advisory on disks ,does 80 mph instantly
so quick .question is the the RE one of the quickest dt125s as it pees on my dtr 2002
https://imgshare.io/image/img-4735.pMVR47
https://imgshare.io/image/img-4732.pMV3ng
new and old
https://imgshare.io/image/img-4739.pMVWx6

[NINJA]

@kevb1967 Sweet looking bikes there bud.

[Calum]

Yeah wow, that's quite a transformation. Looking great!

[SpookDog]

@kevb1967
That’s a very healthy looking transmutation, for sure!...

You can still post pics here, once you’ve hosted them:

How much was this dreamboat from fleabay, if you don’t mind me asking?...

[kevb1967]

@spookdog
it was £1000 on eBay and spent £700 on all parts inc exhaust and a new set of tyers

[SpookDog]

@kevb1967
That’s a bargain, it looks great. Most people are scared to take the gamble and get their hands dirty. It’s the best way to learn if you’ve got no one to teach you though. Even if you had to rebuild the engine it came in at a good price...

[kevb1967]

does a Y-1 barrel have better performance than a Y-2 Barrel with a Y-1 head ?

[declan]

@kevb1967 I've heard that the y1 is the highest compression head but I'm not sure on that I tried researching but didn't find anything