2002 dt125r rev limit??

[Mitch_350z]

@calum I've set the pv flush with the top of the exhaust port it's a little off the 'u' and hole behind the cover but is spot on?? I'm running out of ideas??
Cheers Mitch

[declan]

@Calum wait a min buddy are you telling me my dt is still restricted it redlines around 8.5?

[Calum]

@declan Yeah should pull to around 12 mate.

@Mitch_350z So long as its flush with the exhaust port that's the main thing.

How does it ride now?

[declan]

@calum I know this is the most asked question but I've not seen no reed switch do you want me to start a new thread?

[Calum]

@declan Open up a new thread bud please.

[Mitch_350z]

@calum it seems to ride better when pinned but still only does 65 max and doesn't pull too well in 6th?? Struggles a little to rev up to but don't know If this is because of the pinning??

[Calum]

@mitch_350z It shouldn't pull well at the lower RPMs, but past 6 it should pull hard to 12. If it doesn't then it's not the powervalve causing the problem.

[Mitch_350z]

@calum ok thanks mate I'll have to do a bit more digging, just out of curiosity my other dtr I had was also a 2002 but had a 3 wire servo rather than the 5 wire this one has?? What difference does this make??
Cheers Mitch

[Darty]

Everybody has to remember that 99' onwards 3RM DT's are CDI restricted to 8,500 RPM...

So, don't expect anything like a 3 wire servo Pre 96' model.

[Calum]

@darty The DTRE's are not restricted to 8500. The DTR's may be.

[finnerz89]

@darty definitely not, my DTX goes way past that.

[Calum]

@finnerz89 Well, I wouldn't say WAY past. I think it's 10k. Because the Powervalve closes then and then it really struggles. But it's as simple as earthing the black and green wire then you get full power.

[finnerz89]

@calum I've had 12k a couple of times. Earthing that cable transformed it

[Darty]

@finnerz89 Yeah sick, the DTRs though - are different sadly.

DTRE/X use a non Restricted CDI.

2002''s are doomed to 8.5k.

[NINJA]

@darty My '03 was de-restricted and went up to 11K+ NP's.

[Darty]

@cyber-ninja Tell you what, it's said that there were some 3RM CDI's that were Unrestricted from factory for last model 2003'

I can't remember the CDI code, if you had one, that was pretty rare!

[NINJA]

@darty I can't answer that for you as I sold the bike, but if it was an un-restricted CDI then yes I was very lucky indeed!!

[Mitch_350z]

@darty could this be as simple as swapping the cdi for an unrestricted one or is this not possible??

[Calum]

My brother had a 2001 DTR and it was slow as fook.

Although once derestricted it went like stink.

Pretty sure he swapped out the CDI though.

[declan]

@calum do most still have the reed valve behind the clock or is that only for speed not revs?