DT200WR restoration project pic heavy
-
@Louis-James Is that the original one which came with the bike? If so why not just get it re-powder coated???
-
@NINJA it's not mine.. just a picture I found online
-
@Louis-James AAAHHHH OK - shame but I'm sure that you'll find one from somewhere???
-
-
Here's the spare set of wheels and tyres that came with the bike.
Top brand tyres to be fair.
The rear wheel is a straight swap (3bn hub with 2.15 alloy rim)
However the front wheel has a different hub... Like the late 90s yz.
If the brake discs faces offset is correct then I could turn the hub in a lathe to get the brake disc to fit,Not really sure what I want to do with these wheels. Part of me wants to build them up with purple hubs and stainless spokes.
I'd probably sell the tyres as they are MX ones
-
@Louis-James you tried DTX wheels in your WR? I'm going to run mine this year as-is and rebuild it next winter but would like to sumo it and use as a commuter.
Bike looks great btw!
Carriers are ten a penny in Thailand and South America
-
-
@Glynn123 do you have a picture of the front wheel?
Is the tire on it? -
@Nottsbiker thanks mate. The only wheels I've put on my dt200wr are the original ones.
I will probably sell both tyres and the front complete wheel
-
@Louis-James yeah there's some dualsport tyre on it right now, I'll try get a picture when I finish work in the morning, should get back to you sometime over the weekend if not though
-
@Glynn123 ok thanks.
Would you prefer to sell the whole set up? Or do you want the tyre?
-
@Louis-James I'd be happy to sell the whole lot if you wanted, I have no use for the tyre as my DT is just in sm trim and should be staying that way
-
@Glynn123 did you fit wr200 forks?
Just after the front wheel tbh.
Thanks -
@Louis-James I fit WR 426 forks but made my own custom axle to run the standard DTR/WR200 front hub sizes, the WR200 front disc was the same size as a standard nissin front brake system on a WR 426 so was a better wheel choice than changing calipers to use the smaller DTR wheel and disc combo
-
@Glynn123 the front wheel I have looks exactly like a wr400 or wr426.
-
@Louis-James the axle is larger in the 400/426, the WR 200 wheels I bought use the same size axle as a DT, I actually ran them with the DT spacers on my standard forks for a while. Is this the same with yours?
-
@Glynn123 I haven't tried them on yet. But you could use bearings with small ID?
-
@Glynn123 according to the All Ball's site the 400 front end fits straight onto the 200. Guessing it wasn't as easy as that for the 125?
-
@Nottsbiker are you referring to the front wheel or fork assembly mate?
